Functional Description - Abicor Binzel MF1/2 Betriebsanleitung

5 Functional Description

4.2 Storage
5 Functional Description
1
6
1 VTS
2 Torch interface
Fig. 2 Functional Description
EN - 8
Physical storage conditions in a closed room:
 Tab. 3 Temperature on page EN-5
The media required for the welding process - welding current, shielding gas,
coolant and blast air - are passed through the master feeder MF1/2 and fed
to the torch. The interfaces with the torch and the cable assembly are adapted
to the application-specific requirements. The master feeder MF1/2 is fastened
to the robot or the safety cut-out by means of a robot mount. The four-roll drive
feeds the wire at a constant wire feed. The master feeder is used for the push
function. The wire can be fed directly by means of a roll liner or by means of a
slave drive exactly tuned to the master feeder. This slave drive is integrated, for
example, into the M-Drive or a power supply.
2
5
3 Cable assembly interface
4 Control lead connection
3
4
5 Robot mount interface
6 ABIROB® W
MF1/2