Eu Declaration Of Conformity; Responsibilities Of The User - Abicor Binzel MF1/2 Betriebsanleitung

2 Product Description

1.1 EU Declaration of Conformity

Designation
Relevant EC Directives
Harmonized standard applied
Tab. 2 Declaration of Conformity

1.2 Responsibilities of the User

2 Product Description
2.1 Designated Use
EN - 4
according to the EC Directives:
Machinery Directive 2006/42/EC
Low-Voltage Directive 2006/95/EC
Electromagnetic Compatibility Directive 2004/108/EC.
We,
Alexander Binzel Schweisstechnik GmbH & Co. KG
Kiesacker 7-9, 35418 Alten-Buseck
hereby declare that, on the basis of its design and construction, the present
product described in these operating instructions complies with the basic safety
and health requirements of the EC directive. Any modification not agreed with
us will void this declaration.
MF1/2
EC Low-Voltage Directive 2006/95/EC
EN 60974-5
Within the EEA (European Economic Area) the current version of the national
implementation of the Framework Directive (89/391/EEC) and the related
individual directives and, of these, especially Directive (89/655/EEC)
concerning the minimum safety and health requirements for the use of work
equipment by workers at work must be adhered to. In Germany, the Labour
Protection Law and the Company Safety Ordinance must be heeded. In
addition, the operator must ensure that the welding torch and welding unit
comply with the EC EMC Directive (04/108/EC) and that the signal utilization
of the integrated welding current monitoring against stray currents is installed
properly.
The master feeder MF1/2 forms part of the ABICOR BINZEL master feeder
system and is exclusively intended for robot and machine torch use. Designated
use also includes the observance of the prescribed operating, maintenance
and servicing instructions.
MF1/2