Dell POWERVAULT MD1120 Rack-Installationsanleitung Seite 15

2 Push the mounting rail forward until the two mounting hooks enter their
3 At the back of the cabinet, pull back on the mounting-bracket flange until
4 Repeat step 1 through step 3 for the mounting rail on the other side
5 Ensure that the mounting rails are mounted at the same vertical position
Downloaded from www.Manualslib.com
square holes. Then, push down on the mounting-bracket flange until
the mounting hooks seat and the blue tab on the top mounting hook pops
out and clicks (see Figure 1-5).
the mounting hooks enter their square holes. Then, push down on the
flange until the mounting hooks seat and the blue tab pops out and clicks.
of the rack.
on both sides of the rack.
manuals search engine
Rack Installation Guide
13