Specifications; Important Safety Instructions - Makita DTD146Z Betriebsanleitung

ENGLISH
(Original instructions)
1 Red indicator
2 Button
3 Battery cartridge
4 Star mark
5 Switch trigger
6 Lamp
7 Reversing switch lever
8 LED indicator
9 Bit

SPECIFICATIONS

Model
Machine screw
Capacities Standard bolt
High tensile bolt
No load speed (min
Impacts per minute
Overall length
Net weight
Rated voltage
• Due to our continuing programme of research and
development, the specifications herein are subject to
change without notice.
• Specifications and battery cartridge may differ from
country to country.
• Weight, with battery cartridge, according to EPTA-Pro-
cedure 01/2003
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and instruc-
tions may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for future refer-
ence.
CORDLESS IMPACT DRIVER
SAFETY WARNINGS
1. Hold power tool by insulated gripping surfaces,
when performing an operation where the fas-
tener may contact hidden wiring. Fasteners con-
tacting a "live" wire may make exposed metal parts
of the power tool "live" and could give the operator
an electric shock.
Explanation of general view
10 Sleeve
11 Bit-piece
12 Hook
13 Screw
14 Standard bolt
15 Fastening torque
16 Proper fastening torque
17 Fastening time
18 High tensile bolt
–1
)
1.2 kg (with battery BL1415/BL1415N)
1.4 kg (with battery BL1430/BL1440)
ENE033-1
GEA010-1
GEB054-1
DTD134
4 mm – 8 mm
5 mm – 14 mm
5 mm – 12 mm
0 – 2,400
0 – 3,200
138 mm
D.C. 14.4 V
2. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
3. Hold the tool firmly.
4. Wear ear protectors.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product.
MISUSE or failure to follow the safety rules stated in
this instruction manual may cause serious personal
injury.

IMPORTANT SAFETY INSTRUCTIONS

FOR BATTERY CARTRIDGE
1. Before using battery cartridge, read all instruc-
tions and cautionary markings on (1) battery
charger, (2) battery, and (3) product using bat-
tery.
2. Do not disassemble battery cartridge.
3. If operating time has become excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
4. If electrolyte gets into your eyes, rinse them out
with clear water and seek medical attention right
away. It may result in loss of your eyesight.
19 Limit mark
20 Screws
21 Rear cover
22 Spring
23 Arm
24 Recessed part
25 Carbon brush cap
26 Lead wire
27 Hole
DTD146
0 – 2,300
1.3 kg
(with battery BL1815/BL1815N/BL1820)
1.5 kg
(with battery BL1830/BL1840/BL1850)
D.C. 18 V
ENC007-8
5