Inserting / Replacing Batteries; Safety Devices; Overview Of Functions And Programmes - MAXXMEE EMS-Set Bedienungsanleitung

EN
water straight away and seek medical
assistance immediately. There is a
danger of burns from battery acid!
■
Do not use the device if it is dam-
aged.
NOTICE – Risk of Damage to Materi-
al and Property
■
Use only the battery type specifi ed in
the technical data.
■
Always replace all batteries together.
Never use batteries of different types
or brands, or batteries with different
capacities.
■
Take the batteries out of the controllers
when they are dead or if you will not
be using the device for a prolonged
period. This will prevent any damage
that might occur if a battery leaks.
■
Remove a dead battery from the con-
troller immediately.
■
Do not use the device in rooms with
high humidity.
■
Do not bend the pads sharply.
■
Switch off the controllers before
changing the position of the pads.
■
The pads must not come into con-
tact during use with metal parts, e.g.
on belts, wrist watches, jewellery or
similar items.
■
Protect the device from: impacts,
direct sunlight, sub-zero tempera-
tures, persistent moisture and wet
conditions.
■
Use only original accessories from the
manufacturer in order to guarantee
that there is no interference that may
prevent the device from working and
to avoid possible damage.
12
INSERTING / REPLACING
BATTERIES
 
Each controller (2) requires 2
batteries (1.5 V; AAA).
Before inserting the batteries, check
whether the contacts in the controller
and on the batteries are clean, and clean
them if necessary.
1. Slide open the battery compartment
cover on the bottom of a controller in
the direction of the arrow.
2. Remove any used batteries and
dispose of them in an environmentally
friendly way.
3. Insert two new batteries. Pay attention
to the correct polarity (+ / –).
4. Place on the battery compartment
cover and slide it counter to the
direction of the arrow. The locking lug
must engage audibly.

SAFETY DEVICES

The device has two built-in safety func-
tions:
• The device automatically switches
off after 10 seconds if no contact is
established between the skin and
silicon electrode.
• The device automatically switches off
after 15 minutes of use.
OVERVIEW OF FUNCTIONS
AND PROGRAMMES
Functions
• The ON / + button (8) is used to
switch on the device, set the inten-
sity of the muscle stimulation and
confi rm the selected programme. The
controllers have 9 intensity levels. The
controllers start on level 1. If you keep
pressing the button, the next-higher