Nordpeis N-27 Montageanleitung Seite 15

Note! Report installation of a stove to your local
authority. The owner of the house is personally
responsible for ensuring compliance with the
mandatory safety requirements and must have the
installation approved by a qualified inspector. Your
local chimney sweep must also be informed about
the installation as this will affect the routines for
regular chimneysweeping services.
WARNING!
During operation some of the surfaces of the inserts
become extremely hot and can cause burn injuries
if touched. Be aware of the strong heat radiated
through the hatch glass. Placing flammable material
closer than the safe distance indicated may cause a
fire. Pyre lighting can cause quick gas ignition with
the risk of damage to property and personal injury.
General
This manual contains instructions about how the
Nordpeis N-27 and N-30 must be constructed and
installed. In order for the Insert's function and safety to
be guaranteed, we recommend that the installation is
carried out by a professional. Our Nordpeis dealers can
recommend suitable technicians, information about our
dealers can be found at www.nordpeis.eu
Instructions for lighting are also supplied with the insert.
Read them carefully and keep them safe for future use.
The inserts are type approved and can be connected to
a chimney dimensioned for a flue gas temperature of
350°C, the external diameter of the connector is Ø200
mm. Supply air from the open air should be used as
combustion air. Follow the recommendations for cross
section areas for convection air.
Technical Data
Model
Power output
Nominal output
Efficiency
Weight (kg)
Width (mm)
Depth (mm)
Height (mm)
GB
N-27 N-30
6-12 kW 6-12 kW
9 kW 10 kW
81% 81%
225/D230 245/D250
785 685
515 515
1315 1535
15