Description (Fig. A) - DeWalt DW341 Übersetzung Der Originalanweisung

Date Code Position (Fig. A)
The date code 15 , which also includes the year of manufacture,
is printed into the housing.
Example:
Year of Manufacture
Description (Fig. A)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
On/off switch
1
Lock-on button
2
Speed control dial
3
Sawdust blower control
4
Blade latch
5
Finger guard
6
Blade holder
7
Guide roller
8
Shoe
9
Pendulum stroke selector
10
Intended Use
Your jig saw has been designed for professional cutting of wood,
steel, aluminium, plastic and ceramic material.
DO nOt use under wet conditions or in the presence of
flammable liquids or gases.
These jigsaws are professional power tools.
DO nOt let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
• Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect tool from power
source before making any adjustments or removing/
installing attachments or accessories. An accidental
start‑up can cause injury.
Fitting and Removing a Saw Blade (Fig. C)
The tool-free blade exchange system ensures quick and easy
changing of saw blades.
• Open the blade holder
latch 5 .
• Insert the saw blade into the blade holder
back of the blade into the groove of the guide roller
• Release the blade latch
XXXX XX XX
7 by fully retracting the blade
7 guiding the
5 .
• To remove the saw blade, fully retract the blade latch and
pull the blade out of the holder.
Saw Blades
Blade type
Fine-toothed cutting blade
Coarse-toothed cutting blade
Metal cutting blade
Flush cutting blade*
* Not available in all countries.
A wide variety of dedicated saw blades is available as an option.

WARNING: Always select your saw blade with great care.
Setting the Bevel Angle (Fig. D)
The adjustable shoe
up to 45°. The bevel scale has preset positions at 0° and 45°.
1. Slacken the screws
2. Slide the shoe
3. Tilt the shoe and set the desired bevel angle using the scale.
4. Tighten the screws.
Setting the Pendulum Stroke (Fig. A)
The adjustable pendulum stroke guarantees a perfect cutting
stroke for different materials.
• Slide the selector
to the table below. The selector can be manipulated
during operation.
Pos. Wood
2 Fast cuts
2 Thick workpieces
1 Plywood
Chipboard
0 Thin workpieces
Fine cuts
Setting the Sawdust Blower (Fig. A)
The sawdust blower conducts an adjustable stream of air
to the saw blade to keep the workpiece clear of sawdust
during operation.
• Set the sawdust blower using the lever
‑ Low
‑ Intermediate
‑ High
8 .
Applications
for smooth straight cuts
for fast straight cuts
for ferrous and non-ferrous metals
for finishing off cuts up to a wall or edge
9 allows cutting of LH and RH bevel angles
11 using the supplied wrench.
9 toward the saw blade.
10 to the desired position referring
Metal Plastics
- PVC
- Fibreglass Acrylic
Aluminium -
Non-ferrous
Sheet metal -
4
For working with metals, when using
coolants and lubricants and for use
with dust extraction.
For working with wood and similar
materials in low speed.
For working with wood and similar
materials in high speed.
EngLIsh
.
21