Setting The Alarm - IBP BP 603 Gebrauchsanweisung

8 setting the alarm

1. Press the SET ALARM key
2. You can select 3 memory locations. Press the SET ALARM key
select the desired memory location.
Press
3. To set the alarm timer, press the SET TIME key
Chapter 7 on page 11. To conclude the time setting procedure, press the SET TIME key
4.
To switch the alarm timer on or off, simply press the MEMORY key M after you have set the time
required
12
to enter alarm setting mode
Press
Press
as often as you require until you
Press
Press
. Next, set the time required as described in
Press M
again.