Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2.
Before starting the tool, read this instruction manual
to become familiar with the handling of the tool.
3.
Do not lend the tool to a person with insuffi-
cient experience or knowledge regarding han-
dling of brushcutters and string trimmers.
4.
When lending the tool, always attach this
instruction manual.
5.
Handle the tool with the utmost care and
attention.
Never use the tool after consuming alcohol or
6.
drugs, or if feeling tired or ill.
7.
Never attempt to modify the tool.
8.
Follow the regulations about handling of brush-
cutters and string trimmers in your country.
Personal protective equipment
► Fig.1
1.
Wear safety helmet, protective goggles and
protective gloves to protect yourself from
flying debris or falling objects.
2.
Wear ear protection such as ear muffs to pre-
vent hearing loss.
3.
Wear proper clothing and shoes for safe
operation, such as a work overall and sturdy,
non-slip shoes. Do not wear loose clothing or
jewelry. Loose clothes, jewelry or long hair can be
caught in moving parts.
4.
When touching the cutting tool, wear protec-
tive gloves.
Work area safety
1.
Operate the tool under good visibility and day-
light conditions only. Do not operate the tool in
darkness or fog.
2.
Do not operate the tool in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. The tool creates sparks
which may ignite the dust or fumes.
3.
During operation, never stand on an unstable
or slippery surface or a steep slope. During
the cold season, beware of ice and snow and
always ensure secure footing.
During operation, keep bystanders or animals
4.
at least 15 m away from the tool. Stop the tool
as soon as someone approaches.
5.
Never operate the tool while people, especially
children, or pets are nearby.
6.
Before operation, examine the work area for
stones or other solid objects. They can be
thrown or cause dangerous kickback and result in
serious injury and/or property damage.
7.
WARNING: Use of this product can create
dust containing chemicals which may cause
respiratory or other illnesses. Some examples
of these chemicals are compounds found in
pesticides, insecticides, fertilizers and herbi-
cides. Your risk from these exposures varies,
depending on how often you do this type
of work. To reduce your exposure to these
chemicals: work in a well ventilated area, and
work with approved safety equipment, such as
those dust masks that are specially designed
to filter out microscopic particles.
Electrical and battery safety
Do not expose the tool to rain or wet condi-
1.
tions. Water entering the tool will increase the risk
of electric shock.
Do not use the tool if the switch does not turn it
2.
on and off. Any tool that cannot be controlled with
the switch is dangerous and must be repaired.
Prevent unintentional starting. Ensure the switch
3.
is in the off-position before installing a battery
pack, picking up or carrying the tool. Carrying the
tool with your finger on the switch or energising the
tool that have the switch on invites accidents.
4.
Do not dispose of the battery(ies) in a fire.
The cell may explode. Check with local codes for
possible special disposal instructions.
5.
Do not open or mutilate the battery(ies).
Released electrolyte is corrosive and may cause
damage to the eyes or skin. It may be toxic if
swallowed.
6.
Do not charge battery in rain, or in wet
locations.
Putting into operation
1.
Before assembling or adjusting the tool,
remove the battery cartridge.
2.
Before handling the cutting tool, wear protec-
tive gloves.
Before installing the battery cartridge, inspect
3.
the tool for damages, loose screws/nuts or
improper assembly. If the cutting tool is bent
or damaged, replace it. Check all control levers
and switches for easy action. Clean and dry
the handles.
4.
Never attempt to switch on the tool if it is dam-
aged or not fully assembled. Otherwise serious
injury may result.
5.
Adjust the shoulder harness Adjust the
hand grip to suit the operator's body size if
adjustable.
6.
When inserting a battery cartridge, keep the
cutting attachment clear of your body and
other object, including the ground. It may rotate
when starting and may cause injury or damage to
the tool and/or property.
7.
Remove any adjusting key, wrench before
turning the tool on. An accessory left attached
to a rotating part of the tool may result in personal
injury.
8.
The cutting tool has to be equipped with the
guard. Never run the tool with damaged guards
or without guards in place!
9.
Make sure there are no electrical cables, water
pipes, gas pipes etc. that could cause a hazard
if damaged by use of the tool.
Operation
In the event of an emergency, switch off the
1.
tool immediately.
2.
If you feel any unusual condition (e.g. noise,
vibration) during operation, switch off the
tool and remove the battery cartridge. Do not
use the tool until the cause is recognized and
solved.
11 ENGLISH
Werbung
Inhaltsverzeichnis
