Klarstein Oceana Bedienungsanleitung Seite 33

(2) Setting up the water supply
Note: Before adding water, press the
Power button to turn on the dishwasher.
You can fill the device with water in two ways:
• Permanent connection via the tap (1)
• Manual filling via the cap at the top of the
device (2)
How to tell if there is enough water in the tank:
• If there is too little water in the tank, the
indicator lights up.
• When the tank is filled with enough water,
a short beep sounds for 3 seconds and
the display goes out.
(3) Filling the device
• Remove the larger food residues from the dishes.
• Open the door, place the dishes in the basket and add detergent.
Populate the device by size and from
both sides to the center. All cutlery
should be tilted to improve cleaning
performance. The arm may be blocked
by improper placement of the cutlery, in
which case dishes may not be properly
cleaned.
EN
33