Online USV XANTO RT 1000 Benutzerhandbuch Seite 73

ON-button:
Press the ON-button until you hear an audible signal (approx.
1–2 secs.). The "Alarm", "Line", "Bypass", "Inverter" and "Bat-
tery" LEDs will commence a flashing cycle to indicate that the
battery test is in progress. The battery test lasts for 5 seconds.
If the test detects a faulty battery, the test will be interrupted
immediately and normal mode will be resumed.
In the event of a faulty battery, please call the ONLINE-Hotline
at your earliest convenience.
NOTE:
ONLINE-Hotline: +49 (0) 89 / 2 42 39 90 18
DataWatch software:
You can also run a remote battery test via the DataWatch
software. For information concerning this option, please refer
to the separate instructions on the DataWatch CD.
Seite 73 von 128