Klarstein Pizzaiolo Pro Bedienungsanleitung Seite 25

Leak test
• Perform a leak test each time the gas bottle is connected or reconnected.
• Never use an open flame to check if gas is leaking.
• Do not smoke while performing the leak test.
• Always carry out the leak test outdoors in a well-ventilated area away from ignition
sources such as gasoline, open flames, sparks, or electrical equipment.
• The appliance must be checked regularly for gas leaks. If a smell of gas is
perceptible, the leak test must be carried out immediately.
Carrying out the leak test
• Make a soap and water soap solution in a ratio of 1: 3. The soap solution can be
applied to the areas to be tested with a bottle, brush, dishwashing bottle or cloth:
gas bottle valve, gas regulator, all gas connections, hose connections and along
the entire length of the connection hose.
• The gas valve should be turned to the 'OFF' position when applying the soap
solution. Once the soap solution has been applied everywhere, the gas valve
should be turned to the 'ON' position.
• If there is a leak at one point, bubbles will appear at the appropriate place.
• If there is a leak, immediately turn on the gas valve. Tighten the leaking fittings,
open the gas valve and check all locations again.
• If the leak does not close after several attempts, contact your local gas dealer or
similarly qualified person. Never use the grill as long as there is a leak.
EN
25