The maximum length must not exceed 44 m.
Make sure that you always connect the connectors in the right way. First attach the srew plug onto the tube.
Attach the connector onto the cable-ends then. Fix the screw plug. Connect the sockets with one another
and fix the srew plug. Connect the next tube like described above.
The last tube has to be terminated with an end cap. Please make sure that you stick the end cap at the tube.
How to connect the tube to the power supply:
Connect the power-connector to the mains. Make sure that the outlet is in a dry area.
How to connect a controller:
Connect the power cord with your controller.
After the installation, the power supply cable, the plug and the connector must be free of any tractive forces
and rotary forces.
The lighting chain must never be covered with any object.
OPERATION
After you connected the lighting chain to the mains, the lamps start burning.
CLEANING AND MAINTENANCE
We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or
solvents!
There are no serviceable parts inside the device. If defective, please dispose of the unusable lighting chain
in accordance with the current legal regulations.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
Power consumption/meter:
Power consumption/tube:
Protection grade:
Lamps/meter:
Lamps/tube:
Lamp-distance:
Tube-diameter:
Maximum length:
Weight/tube:
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
230 V/50 Hz
15.5 W
695 W
IP44
36
1584
27 mm
13 mm
44 m
9.3 kg
11/22
00026732.DOC, Version 2.1