Error Codes - Scandomestic SFO 100 Bedienungsanleitung

Problem
The dishesare
not drying

Error codes

When some malfunctions come on, the appliance will display error codes to
warn you:
Meanings
Codes
Longer inlet time.
Not reaching required
temperature
Overflow.
Touch button adhesion
Communication anomaly
Water tank float anomaly
Water tank float anomaly
WANING
If overflow occurs, turn off the main water supply before calling a service.
If there is water in the base pan because of an overfill or small leak,
the water should be removed before restarting the dishwasher.
Possible Causes
Wrong program has
been selected.
Use of cutlery with a
low-quality coating.
34
What To Do
With a short programme, the
washing temperature is lower,
decreasing cleaning performance.
Choose a programme with a long
washing time.
Water drainage is more difficult with
these items. Cutlery or dishes of this
type are not suitable for washing in
the dishwasher.
Possible Causes
A flow meter, drain valve, or pump failure,
it should be repaired by a qualified worker.
Heating tube or thermistor anomaly,it
should be repaired by a qualified worker.
Some element of dishwasher leaks .
Water or other material in the key area
causes E9 or it should be repaired by a
qualified worker.
It should be repaired by a qualified worker.
It should be repaired by a qualified worker.
It should be repaired by a qualified worker.