Error Codes - Scandomestic SFO 2203 W Bedienungsanleitung

3 Close the cover and press on it until it locks into place.
NOTE:
Be aware that depending on the soiling of water, setting may be
different.
Please observe the manufacturer's recommendations on the de-
tergent packaging.

ERROR CODES

If there is a malfunction, the dishwasher will display error codes
to identify these:
The Rapid light flicker fleetly
• Longer inlet time.
Faucets is not opened, or water intake is restricted,or water
pressure is too low.
The Rapid and 90 Min light flicker fleetly
• Not reaching required temperature.
Malfunction of heating element .
The Glass light flicker fleetly
• Overflow
Some element of dishwasher leaks .
WARNING
If overflow occurs, turn off the main water supply before calling
a service.
If there is water in the base pan because of an overfill or small
leak, the water should be removed before restarting the dish-
washer.