Scandomestic SFO 100 Bedienungsanleitung Seite 40

Please read the corresponding content on the instruction manual for detailed
operating method.
Connected to power supplies
The power supply is 220-240VAC 50 Hz
the specification of the socket is 10 A 250 VAC
The connection of the drain pipe: Put end of the drain into a sink or bucket.
Add water into the dishwasher's tank
Note:Before adding water , you need to press power
button to turn on the diswasher
There are two ways to add water into the tank:
Connect inlet hose to the tap;
1
Open the cap and add water into the dishwasher's
2
tank manually
There are two ways of prompting the tank that full of water.
1. Before starting:
When the tank is full of water, the machine will
beep fleetly for 3 seconds
2. After starting :
Water is not enough,
Water is enough,
beep fleetly for 3 seconds
Remove the larger residue
Please remove the large residue before placing.
QUICK USER GUIDE
Fix the drain pipe with the back pipe of the machine.The interface
is fitted with clamps and tightened with a screwdriver.
or
Fix the drain pipe with
suction cups
.
light is on;
light will be off and the machine will
.
1
or
2