At The End Of The Wash Cycle; Forced Drainage Operation - Scandomestic SFO 100 Bedienungsanleitung

At the end of the Wash Cycle

When the working cycle has finished, the buzzer of dishwasher will sound 8 seconds,
then stop. Turn off the appliance using the ON/OFF button, shut off the water supply
and open the door of the dishwasher. Wait a few minutes before unloading the
dishwasher to avoid scald, the dishes and utensils are still hot and more susceptible
to breakage. They will also dry better.
Switch Off the Dishwasher
1.Switch off the dishwasher by pressing the ON/OFF button.
2.Turn off the water tap!
Open the door carefully
Hot dishes are sensitive to knocks. The dishes should be allowed to cool down
around 15 minutes before removing from the appliance.
Open the dishwasher's door, leave it ajar and wait a few minutes before removing
the dishes. In this way they will be cooler and the drying will be improved.
Unloading the dishwasher
It is normal that the dishwasher is wet inside.
WANING
It is dangerous to open the door when washing, because the hot water
may scald you.

Forced drainage operation

In standby mode, you can press and hold "Baby care" button + "Glass wash" button
for 3 seconds simultaneously to drain the water tank.
23