Connection Of Additional Control Devices; Compatibility With Roco And Fleischmann Components - roco Z21 Benutzerhandbuch

Digital centre
Warning: Positively do not connect
an analogue transformer to the
power circuit of your digital system!
Destruction of the Z21 Digital
Centre would be the result!
40

2.1 Connection of Additional Control Devices

You will probably prefer to control your Z21 Digital System from your smartphone or tablet PC. But if
you want to share control with others or do not have your smartphone at hand, you can also connect
your current multiMAUS or local mouse control devices to the X Bus sockets of the Z21 Digital
Centre.
Each of these control devices can interface with all locos and digital components. This allows control-
ling at any time locos controlled by other devices by selecting any function of the corresponding loco
or the loco controller from your Z21 mobile app.

2.2 Compatibility with Roco and Fleischmann Components

The Z21 Digital Centre can be connected without problem to all Roco and Fleischmann digital
devices, based on the RocoNet or the X Bus protocol. These include:
▶ multiMAUS, Lokmaus 2 and Lokmaus R3 (Art. No. 10760, 10790, 10860 and 10792)
▶ Keyboard (Art. No. 10770) and RouteControl (Art. No. 10772)
©
▶ Roco booster (not RailCom
▶ For further information on compatibility, see online www.Z21.eu.
compatible, Art. No. 10762 and 10765)