Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
28 | English
Cause
Wood moisture content is outside the
measuring range (too low) or measurement
has not been performed correctly
The measuring tool monitors the correct operation in each measurement. When a defect
is determined, "Err" and the warning symbol (c) are shown in the display. Switch the
measuring tool off and on again. If the error persists, remove the batteries and then rein-
sert these after a few seconds. If the aforementioned corrective measures cannot correct
an error, send the measuring tool via your dealer to be checked by an after-sales service
agent for Bosch.
Maintenance and Service
Maintenance and Cleaning
Check the measuring tool before each use. If the measuring tool is visibly damaged or
parts have become loose inside the measuring tool, safe function can no longer be en-
sured.
Only store and transport the measuring tool in a suitable container, such as the original
packaging.
If repairs are required, send in the measuring tool in its original packaging.
Do not affix any stickers over the pins.
Keep the measuring tool clean at all times.
Never immerse the measuring tool in water or other liquids.
Wipe off any dirt using a damp, soft cloth. Do not use any detergents or solvents.
When cleaning the measuring tool, ensure that no liquids enter the tool.
After-Sales Service and Application Service
Our after-sales service responds to your questions concerning maintenance and repair of
your product as well as spare parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you with any questions about
our products and their accessories.
In all correspondence and spare parts orders, please always include the 10‑digit article
number given on the nameplate of the product.
1 609 92A 5EY | (29.04.2020)
Corrective measures
Take the measurement again in another
area on the wood.
Bosch Power Tools
Werbung
Inhaltsverzeichnis
