Working Advice; Maintenance And Service; Maintenance And Cleaning - Bosch RM 3 Professional Originalbetriebsanleitung

Starting Operation of the Remote Control
The remote control will only work if it is fitted with batteries
that are sufficiently charged.
Set up the rotating platform in such a manner that the signals
of the remote control can directly reach one of the
sensors (2). If the remote control cannot be pointed directly
at a sensor, the working range will be reduced. By reflecting
the signal (e.g. against walls), the working range can be im-
proved even for indirect signals.
Aligning the Measuring Tool with the Rotating
Platform
Manual Rotation
Rotate the measuring tool mounted on the rotating platform
into the required position by hand or using the fine adjust-
ment screw (8).
Rotation with the Remote Control
You can choose between the following movements:
Quick clockwise rotation:
Press and hold the button for quick clockwise
rotation (22).
Quick anticlockwise rotation:
Press and hold the button for quick anticlock-
wise rotation (17).
Slow clockwise rotation:
Press and hold the button for slow clockwise
rotation (21).
Slow anticlockwise rotation:
Press and hold the button for slow anticlock-
wise rotation (18).
Gradual clockwise rotation:
Press and hold the button for gradual clockwise
rotation (20).
Gradual anticlockwise rotation:
Press and hold the button for gradual anticlock-
wise rotation (19).
Rotation with a Smartphone
For information about remotely controlling the measuring
tool and rotating platform using a smartphone, please refer
to your measuring tool's instruction manual.

Working Advice

Note on Gradual Alignment Over Short Distances
To ensure precise positioning of the laser line even over
large distances, the rotating motion for gradual rotation is
very small. The shorter the distance between the laser and
the target, the smaller the effect of the laser rotating motion.
Bosch Power Tools
Note on Precise Positioning
If you cannot precisely align the laser line with a reference
point, rotate the platform back a little and try again. If you
still cannot hit the target, reduce the distance between the
measuring tool and the target.

Maintenance and Service

Maintenance and Cleaning

Keep the rotating platform and remote control clean at all
times.
Do not immerse the rotating platform or remote control into
water or other fluids.
Wipe off any dirt using a damp, soft cloth. Do not use any de-
tergents or solvents.
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Malaysia
Robert Bosch Sdn. Bhd.(220975-V) PT/SMY
No. 8A, Jalan 13/6
46200 Petaling Jaya
Selangor
Tel.: (03) 79663194
Toll-Free: 1800 880188
Fax: (03) 79583838
E-Mail: kiathoe.chong@my.bosch.com
www.bosch-pt.com.my
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
Disposal
Electrical and electronic equipment, batteries, accessories
and packaging should be sorted for environmentally friendly
recycling.
English | 11
1 609 92A 73S | (27.01.2022)