Cleaning The Feeder - Canon image PRESS C10010VP Kurzanleitung

3
Follow the cleaning instructions on the touch panel display.
▀

Cleaning the Feeder

If originals which are fed from the feeder become dirty, follow the cleaning procedure below. Clean with a cloth which
is wrung after being dampened in water, and then clean with a soft and dry cloth. Use the provided glass cleaning
cloth for simple cleaning.
2
1
Shutting down the machine.
"Shutting Down the Machine," on p. 13
2
Pull the lever, and open the feeder cover.
3
Clean the rollers and surrounding areas of them inside
1
the feeder cover.
1
Clean the rollers.
2
Clean the surrounding areas of the rollers (if they are very dirty).
IMPORTANT
Make sure that no trash such as pieces of paper gets into the
groove of the multiple sheet feed detection sensor. If trash does
get in, remove it using a soft cloth.
4
Gently close the feeder cover.
Cleaning and Maintenance
23