If Memory Becomes Full; If The Main Power Does Not Turn On - Canon image PRESS C10010VP Kurzanleitung

▀

If Memory Becomes Full

If memory becomes full during scanning, the following messages appear on the touch panel display. Follow the
procedures on the screen, and then delete unnecessary files stored in the Mail Box and Fax/I-Fax Inbox to make more
memory available.
Scanning will be canceled because the memory is full. Do you want to print (send, store)* the scanned pages?
* A part of the message differs, depending on the function used.
[Yes]: A job for the pages scanned into memory is processed. After processing the job, scan the remaining pages.
[No]: A job for the pages scanned into memory is canceled. Scan the whole pages again.
Scanning will be canceled because the memory is full. Wait a moment, then try again.
[OK]: Scan the whole pages again after the current operation is complete.
Could not perform the operation because the memory is full.
[OK]: Delete unnecessary data from memory, and then scan the whole pages again.
▀

If the Main Power Does Not Turn ON

If the machine cannot operate when the main power is turned ON, check the breaker. If the breaker is switched to
the OFF position, do not attempt to turn ON the breaker yourself, and be sure to contact your local authorized Canon
dealer.
"Maintenance" > "Routine Cleaning" > "Inspection of the Breaker" in the User's Guide
32