Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EX-1504HMS
4. Hardware Installation
Because there are large differences between PC's, we can give you only a general in-
stallation guide. Please refer your computer's reference manual whenever in doubt.
1. Install the EX-1504HMS to the wall or to a DIN-Rail if required
2. Connect the USB cable to the USB B-Port at the Hub.
3. Connect the optional power supply into the Terminal Block at the Hub.
4. Now connect the other end from the USB cable (A-Plug) to the A-Port at your PC.
5. Driver Installation
All Operating Systems
After the hardware installation the OS will recognize the device automatically and install
the drivers.
CHECK INSTALLED DRIVER
Open the >Device manager<. Now you should see at „Ports (COM & LPT)" & „USB-
Controller" the following new entry's:
If you see this or a similar information the device is installed correctly.
© Copyright 2020 by EXSYS Vertriebs GmbH. All Rights Reserved
13
English
Werbung
Inhaltsverzeichnis
