Identification; Eu Declaration Of Conformity En; Responsibilities Of The User En; Product Description - Abicor Binzel BRS-LCi Betriebsanleitung

BRS-LCi

1 Identification

The cleaning station BRS-LCi is used in industry and in the trade for automatic cleaning of the gas nozzle
interior of MIG/MAG welding torches. It serves as preventive measure to extend the service lives of torch
and the maintenance intervals. The frame construction consists of an cast aluminium which includes the
pneumatic valves; the support is available as an option. These operating instructions only describe the
cleaning station BRS-LCi. The cleaning station BRS-LCi may only be operated using original
ABICOR BINZEL spare parts.
1.1 EU Declaration of Conformity
according to the EC Directive 06/42/EC machines.
We, Alexander Binzel Schweisstechnik GmbH & Co. KG, Kiesacker 7-9, D-35418 Alten-Buseck
hereby declare that, on the basis of its design and construction and the present model of the cleaning station
BRS-LCi described in these operating instructions complies with the basic safety and health requirements of
the EC directive. Any modification not agreed with us will void this declaration.
Designation
Relevant EC Directives
Harmonized standard applied
Tab. 1
1.2 Responsibilities of the User
Within the EEA (European Economic Area) the current version of the national implementation of the
Framework Directive (89/391/EEC) and the related individual directives and, of these, especially Directive
(89/655/EEC) concerning the minimum safety and health requirements for the use of work equipment by
workers at work must be adhered to. In Germany, the Job Protection Law and the Company Safety
Ordinance must be heeded. In addition, the operator must ensure that the welding torch and welding unit
comply with the EC EMC Directive (04/108/EC) and that the signal utilization of the integrated welding
current monitoring against stray currents is installed properly.

2 Product Description

2.1 Designated Use
The cleaning station BRS-LCi forms part of the welding system and is intended for robot use. Designated use
also includes the observance of the prescribed operating, maintenance and servicing conditions.
2.2 Use contrary to the designated use
Any use other than that described under "Designated Use" is considered contrary to the designated use.
Unauthorized conversions or power increase modifications are not allowed.
Cleaning station BRS-LCi
06/42/EC (machines)
DIN EN ISO 12 100
EU Declaration of Conformity
1 Identification
EN - 3