Product Description - Sharp LL-T15A1 Bedienungsanleitung

Front view
1. MENU button
2. SELECT button
3. buttons
4. BRIGHT button
5. Power LED
6. Power button
7. Brightness sensor
8. Power terminal
9. RGB signal cable
10. Ventilation openings

Product description

This button is used to pop-up, select and close the OSD Menu.
Selects the menu option to be adjusted.
When the On Screen Display (OSD) Menu is displayed:
These buttons are used to increase or decrease the value of a selected option.
When the OSD Menu is not displayed:
These buttons are used to adjust backlight brightness.
The brightness sensor measures the brightness of the surrounding environment
and automatically adjusts to the right brightness.
This LED is lit green when in use and orange when in power-saving mode.
Pressing this button turns the power on. (After turning the power on, it may take
a little time before the screen displays.)
Press the button again to turn the power off.
Measures the brightness of the surrounding environment.
Connect the AC adapter (included) here.
Connects to the computer's analog RGB output terminal.
Note: Never block the ventilation openings as this may lead to overheating
inside the monitor and result in malfunction.
10
Rear view