Sharp LL-T15A1 Bedienungsanleitung Seite 19

MENU 3: WHITE BALANCE
WHITE BALANCE (color tone) can be adjusted as
necessary. (As adjustments are made before ship-
ment, there is no real necessity for further altera-
tion.)
Notes:
- On settings other than [STD] not all graduations
can be displayed. To display all graduations, set
to STD.
- Selecting USER will display the setting values for
[R-CONTRAST], [G-CONTRAST] and
[B-CONTRAST], in order to make fine
adjustments.
- To choose a menu option:
- To go to MENU 4:
COOL . . . Color tone bluer than standard
- . . . . . . Color tone slightly bluer than standard
STD . . . . . Color tone standard setting
- . . . . . . Color tone slightly redder than standard
WARM . . . Color tone redder than standard
USER
R-CONTRAST . . . button for blue-green
button for red
G-CONTRAST . . . button for purple
button for green
B-CONTRAST . . . button for yellow
button for blue
Adjusting the screen display
MENU 4: MODE SELECT
Notes:
-
-
-
OSD H-POSITION (OSD horizontal position)
The position of the OSD display can be moved to
the left and right. (
SELECT button
OSD V-POSITION (OSD vertical position)
MENU button
The position of the OSD display can be moved up
and down. (
400 LINES (degree of resolution)
You can specify the horizontal resolution of a 400-
line screen when using US text, etc.
(
640
720
Note:
-
SCALING (Level of scaling)
The sharpness of the image can be adjusted.
(
Note:
-
-
19
Depending on the resolution of the input signal,
even if menu options can be selected, the display
may not change.
To choose a menu option: SELECT button
When adjustment complete: MENU button
buttons)
buttons)
buttons)
640 X 400 dot mode
720 X 400 dot mode (US text etc.)
As the resolution input for other than 400 lines is
done automatically, there is no need to set it.
buttons)
When the display mode is set to less than
1024 x 768 pixels, the display is enlarged to
cover the whole screen (i.e. the side ratio of the
display may change).
Display modes of 1024 X 768 pixels cannot be
changed.