Herunterladen Inhalt Inhalt Diese Seite drucken
Sharp LL-T1501A Bedienungsanleitung
Sharp LL-T1501A Bedienungsanleitung

Sharp LL-T1501A Bedienungsanleitung

Lcd farbmonitor
Vorschau ausblenden Andere Handbücher für LL-T1501A:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 27
LCD MONITOR
LCD FARBMONITOR
MONITEUR LCD
MONITOR LCD
MONITOR LCD
LL-T1511A
LL-T1501A
OPERATION MANUAL
BEDIENUNGSANLEITUNG
MODE D'EMPLOI
MANUALE D'USO
MANUAL DE FUNCIONAMIENTO
All manuals and user guides at all-guides.com
R
(Figure shown is LL-T1511A.)
(Die Abbildung zeigt das Modell LL-T1511A.)
(Le modèle illustré ici est le LL-T1511A.)
(La figura illustrata è LL-T1511A.)
(La ilustración muestra el modelo LL-T1511A.)

Werbung

Inhaltsverzeichnis
loading

Inhaltszusammenfassung für Sharp LL-T1501A

  • Seite 1 All manuals and user guides at all-guides.com LCD MONITOR LCD FARBMONITOR MONITEUR LCD MONITOR LCD MONITOR LCD LL-T1511A LL-T1501A OPERATION MANUAL BEDIENUNGSANLEITUNG MODE D’EMPLOI MANUALE D’USO MANUAL DE FUNCIONAMIENTO (Figure shown is LL-T1511A.) (Die Abbildung zeigt das Modell LL-T1511A.) (Le modèle illustré ici est le LL-T1511A.) (La figura illustrata è...
  • Seite 2 All manuals and user guides at all-guides.com Table of Contents / Inhaltsverzeichnis / Table des matières / Indice / Índice English ............... . 3 Deutsch .
  • Seite 3: Inhaltsverzeichnis

    All manuals and user guides at all-guides.com Table of Contents Notice for Users in the USA ............4 TCO'99 .
  • Seite 4: Notice For Users In The Usa

    Sharp Plaza, Mahwah, New Jersey 07430 TEL :1-800-BE-SHARP * As an ENERGY STAR Partner, SHARP has determined that this product meets the ENERGY STAR guidelines for energy efficiency. This product utilizes tin-lead solder, and fluorescent lamp containing a small amount of mercury. Disposal of these materials may be regulated due to environmental considerations.
  • Seite 5: Tco'99

    All manuals and user guides at all-guides.com Congratulations! You have just purchased a TCO'99 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products.
  • Seite 6 All manuals and user guides at all-guides.com TCO Development SE-114 94 Stockholm, Sweden Fax: +46 8 782 92 07 Email (Internet): development@tco.se Current information regarding TCO'99 approved and labelled products may also be obtained via the Internet, using the address: http://www.tco-info.com/ Environmental requirements Flame retardants Flame retardants are present in printed circuit boards, cables, wires, casings and housings.
  • Seite 7: Notice For Users In Europe

    All manuals and user guides at all-guides.com Notice for Users in Europe This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC as amended by 93/68/EEC. Dieses Gerät entspricht den Anforderungen der EG-Richtlinien 89/336/EWG und 73/23/EWG mit Änderung 93/68/EWG. Ce matériel répond aux exigences contenues dans les directives 89/336/CEE et 73/23/CEE modifiées par la directive 93/68/CEE.
  • Seite 8: Notice For Users In The Uk

    "WARNING :THIS APPARATUS MUST BE EARTHED" Notice for Users in Australia Service Inquiries Please contact your dealer for service if required or contact Sharp Corporation of Australia on 1 300 13 50 22 for referral to your nearest Sharp authorized Service Center.
  • Seite 9: Tips And Safety Precautions

    • Operation manual (1) • Never rub or tap the monitor with hard objects. • Please understand that Sharp Corporation bears Notes: no responsibility for errors made during use by • You are advised to retain the carton in case the the customer or a third party, nor for any other monitor needs to be transported.
  • Seite 10: Product Description

    All manuals and user guides at all-guides.com Product description Front view LL-T1511A LL-T1501A 6 5 4 3 5 4 3 1. Power button Pressing this button turns the power on when the main power switch (p. 11) is on. (After turning the power on, it may take a little time before the screen dis- plays.) Press the button again to turn the power off.
  • Seite 11 All manuals and user guides at all-guides.com Product description Rear View Note: Never block the Ventilation ventilation openings as this openings may lead to overheating inside the monitor and result in malfunction Power connector The power cord is connected here. RGB signal cable This is to be connected to the computer's analog RGB...
  • Seite 12: Connecting The Monitor And Turning The Monitor On And Off

    All manuals and user guides at all-guides.com Connecting the monitor and turning the monitor on and off Connecting the monitor to a computer Turning the power on (PC etc.) 1. Turn on the monitor's main switch. When connecting, ensure that both the monitor and computer are switched off.
  • Seite 13 All manuals and user guides at all-guides.com Connecting the monitor and turning the monitor on and off For Windows95 For Windows98 Installing monitor set-up information into Windows95. Installing monitor set-up information into Win- dows98. This explanation assumes that the floppy disk drive If the "Add New Hardware Wizard"...
  • Seite 14 All manuals and user guides at all-guides.com Connecting the monitor and turning the monitor on and off For Windows2000 For WindowsMe Installing monitor set-up information into Win- Installing monitor set-up information into dows2000. WindowsMe. This explanation assumes that the floppy disk drive If the "Add New Hardware Wizard"...
  • Seite 15: Turning The Power Off

    All manuals and user guides at all-guides.com Connecting the monitor and turning the monitor on and off Notes: Turning the power off • Please use a USB cable that has a length of less than 3 metres. 1. Turn the computer off. •...
  • Seite 16: Adjusting The Screen Display

    All manuals and user guides at all-guides.com Adjusting the screen display If necessary, the screen can be adjusted as follows. Automatic screen adjustment Automatic screen adjustment (right column) The clock, phase, H-POS (horizontal positioning) Options in MENU 1 (ADJUSTMENT) can be ad- and V-POS (vertical positioning) functions can be justed automatically (Clock, Phase, H-POS, V-POS).
  • Seite 17: Adjusting The Backlight

    2. Open [My Computer] and select [3 ½ Floppy • Fine adjustment (A:)]. If using Windows 3.1, open [File Manager] and choose "A drive". For LL-T1501A 3. Double click on [Adj_uty.exe] to run the Adjustments can be made in the following way: Adjustment Program. The Adjustment Pattern will •...
  • Seite 18: Manual Screen Adjustment

    All manuals and user guides at all-guides.com Adjusting the screen display Easy steps to changing brightness (LL-T1511A Manual screen adjustment only.) The brightness can be changed to any one of three Fine adjustments can be made using On Screen settings. Display (OSD) Menu provided.
  • Seite 19 All manuals and user guides at all-guides.com Adjusting the screen display MENU 1: ADJUSTMENT MENU 2: GAIN CONTROL BLACK LEVEL and CONTRAST are optimized before shipment, but depending on the type of computer being used, further adjustment may be necessary. G A I RO L BLACK LEVEL...
  • Seite 20 All manuals and user guides at all-guides.com Adjusting the screen display MENU 3: WHITE BALANCE MENU 4: MODE SELECT WHITE BALANCE (color tone) can be adjusted as necessary. (As adjustments are made before ship- ment, there is no real necessity for further altera- tion.) S CAL I NG WH I...
  • Seite 21: Monitor Care And Repair

    LCD panel. (A soft cloth such inquire at the shop where you purchased the as gauze or that used for lens cleaning is suitable.) monitor or your nearest Sharp authorized Service Center. (Never attempt this CAUTION! replacement on your own.)
  • Seite 22: Specifications

    All manuals and user guides at all-guides.com Specifications Product specifications Item Specification Name LL-T1511A LL-T1501A 38 cm (15 inches) TFT LCD module LCD display 38 cm (15 inches) Super-V and Anti Glare Low Reflection TFT LCD module Dot pitch 0.297(H) x 0.297(V) mm Screen display size Horizontal 304.1 mm X Vertical 228.1 mm...
  • Seite 23 All manuals and user guides at all-guides.com Specifications Signal timings Dot frequency Display mode Hsync (kHz) Vsync (Hz) (MHz) 31.5kHz 60Hz 25.175MHz 640x480 37.9kHz 72Hz 31.5MHz 37.5kHz 75Hz 31.5MHz VESA 35.1kHz 56Hz 36.0MHz 37.9kHz 60Hz 40.0MHz 800x600 48.1kHz 72Hz 50.0MHz 46.9kHz 75Hz 49.5MHz...
  • Seite 24: Power Management

    All manuals and user guides at all-guides.com Specifications Power management DDC (Plug & Play) The monitor is based on VESA DPMS (Display This monitor supports the VESA DDC (Display Data Power Management Signaling). Channel) standard. To activate the monitor's Power Management func- DDC is a signal standard for carrying out Plug &...
  • Seite 25: Instructions For Installing A Vesa Compliant Arm

    All manuals and user guides at all-guides.com Instructions for installing a VESA compliant arm An arm or stand based on the VESA standard 4. Remove the connector cover. (purchased separately) can be attached to the Remove the screws and lift it upward. monitor.
  • Seite 26 All manuals and user guides at all-guides.com Instructions for installing a VESA compliant arm 9. Being careful not to damage the monitor, spread 11.Attach the arm to the monitor with four screws. out a soft cloth and lay the monitor on it display- side down.
  • Seite 27 All manuals and user guides at all-guides.com Inhaltsverzeichnis Hinweis für Benutzer in den USA ............28 TCO'99 .
  • Seite 28: Hinweis Für Benutzer In Den Usa

    SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07430 TEL :1-800-BE-SHARP * Als ENERGY STAR-Partner bestätigt SHARP, daß dieses Produkt die Richtlinien des ENERGY STAR für sparsamen Verbrauch einhält. In diesem Produkt wird bleihaltiger Lötzinn und eine Leuchtstofflampe mit einem geringen Quecksilberanteil verwendet.
  • Seite 29: Tco'99

    All manuals and user guides at all-guides.com Herzlichen Glückwunsch! Sie haben gerade ein Gerät mit TCO‘99-Zulassung und entsprechender Kennzeichnung erworben! Damit haben Sie sich für ein Produkt entschieden, das für professionelle Anwendungen konzipiert ist. Mit Ihrem Kauf leisten Sie auch einen Beitrag zum Umweltschutz und zur Weiterentwicklung von umweltfreundlichen Elektronikprodukten.
  • Seite 30 All manuals and user guides at all-guides.com TCO Development SE-114 94 Stockholm, Sweden Fax: +46 8 782 92 07 Email (Internet): development@tco.se Aktuelle Informationen zu Produkten mit TCO‘99-Zulassung und -Kennzeichnung erhalten Sie auch im Internet unter folgender Adresse: http://www.tco-info.com/ Umweltanforderungen Flammschutzmittel Flammschutzmittel kommen in Platinen, Kabeln, Drähten, Verkleidungen und Gehäusen vor.
  • Seite 31: Hinweis Für Benutzer In Europa

    All manuals and user guides at all-guides.com Hinweis für Benutzer in Europa This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC as amended by 93/68/EEC. Dieses Gerät entspricht den Anforderungen der EG-Richtlinien 89/336/EWG und 73/23/EWG mit Änderung 93/68/EWG. Ce matériel répond aux exigences contenues dans les directives 89/336/CEE et 73/23/CEE modifiées par la directive 93/68/CEE.
  • Seite 32: Hinweis Für Benutzer In Gb

    Hinweis für Benutzer in Australien Serviceanfragen Wenden Sie sich an Ihren Händler, falls Reparaturen anfallen, oder setzen Sie sich mit Sharp Corporation of Australia unter 1 300 13 50 22 in Verbindung, um die Adresse des nächstgelegenen autorisierten Sharp-Kundendienstzentrums zu erfragen.
  • Seite 33: Tips Und Sicherheitsvorkehrungen

    • Der Monitor darf niemals mit harten • LCD-Monitor (1) Gegenständen abgerieben oder berührt werden. • USB-Kabel (1) • Wir bitten um Ihr Verständnis, daß Sharp Corpo- • Monitor-Einstelldiskette für Windows (1) ration über die gesetzlich anerkannte • Bedienungsanleitung (1) Leistungshaftung hinaus keine Haftung für Fehler...
  • Seite 34: Produktbeschreibung

    All manuals and user guides at all-guides.com Produktbeschreibung Vorderansicht LL-T1511A LL-T1501A 6 5 4 3 5 4 3 1. Netzschalter Mit diesem Schalter wird der Monitor eingeschaltet, wenn der Hauptschalter (S. 35) eingeschaltet ist. (Nach dem Einschalten des Monitors kann es kurze Zeit dauern, bis auf dem Bildschirm etwas angezeigt wird.) Schalten Sie den...
  • Seite 35 All manuals and user guides at all-guides.com Produktbeschreibung Rückansicht Hinweis: Decken Sie nie die Belüftungs- Belüftungsöffnungen ab, da öffnungen sich das Monitorinnere sonst zu stark erwärmen würde und dies Funktions- störungen zur Folge hätte Netzanschluß Hier wird das Netzkabel eingesteckt RGB-Signalkabel Muß...
  • Seite 36: Anschließen Des Monitors Und Ein- Und Ausschalten Des Monitors

    All manuals and user guides at all-guides.com Anschließen des Monitors und Ein- und Ausschalten des Monitors Verbinden des Monitors mit einem Einschalten des Monitors Computer (PC usw.) 1. Schalten Sie den Hauptschalter des Monitors ein. Bevor Sie den Monitor anschließen, müssen Sie den Monitor und den Computer ausschalten.
  • Seite 37 All manuals and user guides at all-guides.com Anschließen des Monitors und Ein- und Ausschalten des Monitors Für Windows 95 4. Wenn [Models] angezeigt wird, klicken Sie auf [Have Disk], bestätigen Sie, daß neben [Copy Installieren der Monitor-Setup-Informationen unter manufacturer's files from:] [A:] angezeigt wird, Windows 95.
  • Seite 38 All manuals and user guides at all-guides.com Anschließen des Monitors und Ein- und Ausschalten des Monitors Für Windows 2000 1. Legen Sie die (mitgelieferte) Monitor-Einstell- diskette in Laufwerk A des Computers ein. Installieren der Monitor-Setup-Informationen unter 2. Aktivieren Sie [Specify the location of the Windows 2000.
  • Seite 39: Ausschalten Des Monitors

    All manuals and user guides at all-guides.com Anschließen des Monitors und Ein- und Ausschalten des Monitors Hinweise: Ausschalten des Monitors • Verwenden Sie ein max. 3 m langes USB-Kabel. • Vergewissern Sie sich vor dem Anschließen, daß 1. Schalten Sie den Computer aus. die Form des USB-Kabelsteckers stimmt.
  • Seite 40: Einstellen Der Bildschirmanzeige

    All manuals and user guides at all-guides.com Einstellen der Bildschirmanzeige Falls erforderlich, kann der Bildschirm folgenderma- Automatische Bildschirmeinstellung ßen eingestellt werden. Automatische Bildschirmeinstellung (rechte Die Optionen im MENU 1 (ADJUSTMENT) können Spalte) automatisch eingestellt werden (Clock, Phase, H- Die Funktionen Clock, Phase, H-POS (horizontale POS, V-POS).
  • Seite 41: Einstellen Der Hintergrundbeleuchtung

    All manuals and user guides at all-guides.com Einstellen der Bildschirmanzeige Öffnen des Einstellmusters (für Windows) Für LL-T1501A Einstellungen können folgendermaßen Wenn Sie mit Windows arbeiten, können Sie das vorgenommen werden: Einstellmuster auf der mitgelieferten Monitor-Ein- • Feineinstellung stelldiskette verwenden. Die in den nachstehenden Bedienungshinweisen Abstimmen der Hintergrundbeleuchtung auf die erwähnten Windows-Meldungen basieren auf der...
  • Seite 42: Manuelle Bildschirmeinstellung

    All manuals and user guides at all-guides.com Einstellen der Bildschirmanzeige Einfache Schritte zum Ändern der Helligkeit (Nur Manuelle Bildschirmeinstellung LL-T1511A.) Die Helligkeit kann in drei Stufen geändert werden. Die Feineinstellung kann über das OSD-Menü Führen Sie die Befehle aus, wenn kein OSD-Menü vorgenommen werden.
  • Seite 43 All manuals and user guides at all-guides.com Einstellen der Bildschirmanzeige MENU 1: ADJUSTMENT MENU 2: GAIN CONTROL Vor der Auslieferung werden die Werte für BLACK LEVEL und CONTRAST optimal eingestellt. Je nach dem verwendeten Computertyp können jedoch weitere Einstellungen erforderlich werden. G A I RO L BLACK LEVEL...
  • Seite 44 All manuals and user guides at all-guides.com Einstellen der Bildschirmanzeige DISPLAY COLORS MENU 4: MODE SELECT Es können maximale Anzeigefarben eingestellt werden. 260K (260.000) und 16M (16,19 Millionen) S CAL I NG MENU 3: WHITE BALANCE WHITE BALANCE (Farbton) kann nach Bedarf V 6 0 8 H z eingestellt werden.
  • Seite 45: Pflege Des Monitors Und Reparaturen

    LCD-Bildschirms mit einem weichen, trockenen dem Sie den Monitor gekauft haben, oder an Tuch vorsichtig ab. (Es eignet sich ein weiches Tuch, das nächste autorisierte Sharp- beispielsweise ein Gaze-Tuch, das auch zum Reini- Kundendienstzentrum. (Nehmen Sie diesen gen von Linsen verwendet wird.
  • Seite 46: Technische Daten

    All manuals and user guides at all-guides.com Technische Daten Produktspezifikationen Element Technische Daten Name LL-T1511A LL-T1501A 38 cm (15 Zoll) TFT-LCD-Modul LCD-Anzeige 38 cm (15 Zoll) TFT-LCD-Modul mit Super-V und Antireflexbeschichtung Punktabstand 0,297(H) x 0,297(V) mm Bildschirmanzeigegröße Horizontal 304,1 mm x vertikal 228,1 mm Auflösung (max.)
  • Seite 47 All manuals and user guides at all-guides.com Technische Daten Signaltakte Punktfrequenz Anzeigemodus Hsync (kHz) Vsync (Hz) (MHz) 31,5kHz 60Hz 25,175MHz 640x480 37,9kHz 72Hz 31,5MHz 37,5kHz 75Hz 31,5MHz VESA 35,1kHz 56Hz 36,0MHz 37,9kHz 60Hz 40,0MHz 800x600 48,1kHz 72Hz 50,0MHz 46,9kHz 75Hz 49,5MHz 48,4kHz 60Hz...
  • Seite 48 All manuals and user guides at all-guides.com Technische Daten Power Management DDC (Plug & Play) Der Monitor basiert auf VESA DPMS (Display Power Dieser Monitor unterstützt den Standard VESA DDC Management Signaling). (Display Data Channel). Um die Power Management-Funktion des Monitors DDC ist ein Signalstandard zum Ausführen von Plug zu aktivieren, müssen sowohl die Videokarte als &...
  • Seite 49: Anweisungen Zum Installieren Eines Vesa-Kompatiblen Arms

    All manuals and user guides at all-guides.com Anweisungen zum Installieren eines VESA-kompatiblen Arms Ein Arm oder Fuß basierend auf dem VESA-Stan- 4. Bauen Sie die Anschlußabdeckung ab. dard (separat erhältlich) kann am Monitor ange- Lösen Sie die Schrauben, und heben Sie die bracht werden.
  • Seite 50 All manuals and user guides at all-guides.com Anweisungen zum Installieren eines VESA-kompatiblen Arms 9. Achten Sie dabei darauf, daß der Monitor nicht 11.Befestigen Sie den Arm mit vier Schrauben am beschädigt wird. Breiten Sie ein weiches Tuch Monitor. aus, und legen Sie den Monitor mit der Anzeige- seite nach unten darauf.
  • Seite 51 All manuals and user guides at all-guides.com Table des matières Avis aux utilisateurs américains ............52 TCO'99 .
  • Seite 52: Avis Aux Utilisateurs Américains

    Sharp Plaza, Mahwah, New Jersey 07430 TEL :1-800-BE-SHARP * En sa qualité de partenaire du programme ENERGY STAR, SHARP a fait en sorte que ce produit réponde aux directives ENERGY STAR en matière d'économie d'énergie. Ce produit contient des soudures étain-plomb ainsi qu'une lampe fluorescente contenant une petite quantité...
  • Seite 53: Tco'99

    All manuals and user guides at all-guides.com Félicitations ! Vous venez d'acquérir un produit agréé et estampillé TCO'99 ! Votre choix vous permet de disposer désor- mais d'un produit développé pour être utilisé dans un environnement professionnel. Votre achat a également contribué...
  • Seite 54 All manuals and user guides at all-guides.com TCO Development SE-114 94 Stockholm, Sweden Fax: +46 8 782 92 07 Email (Internet): development@tco.se Les informations actualisées relatives aux produits agréés et labellisés TCO'99 peuvent également être obtenues via Internet, à l'adresse : http://www.tco-info.com/ Exigences environnementales Retardateurs de flamme Les retardateurs de flamme sont présents dans les cartes à...
  • Seite 55: Avis Aux Utilisateurs Européens

    All manuals and user guides at all-guides.com Avis aux utilisateurs européens This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC as amended by 93/68/EEC. Dieses Gerät entspricht den Anforderungen der EG-Richtlinien 89/336/EWG und 73/23/EWG mit Änderung 93/68/EWG. Ce matériel répond aux exigences contenues dans les directives 89/336/CEE et 73/23/CEE modifiées par la directive 93/68/CEE.
  • Seite 56: Avis Aux Utilisateurs Britanniques

    Avis aux utilisateurs australiens Demandes d'intervention Si une intervention sur l'appareil s'avère nécessaire, veuillez contacter votre revendeur ou Sharp Corporation of Australia au numéro 1 300 13 50 22, qui vous communiquera les coordonnées du Centre d'entretien agréé Sharp le plus proche de votre domicile.
  • Seite 57: Astuces Et Mesures De Sécurité

    • Disque d'installation et de réglage du moniteur moniteur avec des objets durs. pour l'environnement Windows (1) • Il faut savoir que la société Sharp décline toute • Mode d'emploi (1) responsabilité en cas d'erreur survenue durant l'utilisation par le client ou une tierce personne,...
  • Seite 58: Description Du Produit

    All manuals and user guides at all-guides.com Description du produit Vue avant LL-T1511A LL-T1501A 6 5 4 3 5 4 3 1. Bouton d'alimentation Le fait de presser ce bouton active l'alimentation lorsque le bouton principal d'alimentation (p. 59) est en position ON. (Après avoir activé l'alimentation, il se peut que l'allumage du moniteur nécessite un peu de temps).
  • Seite 59 All manuals and user guides at all-guides.com Description du produit Vue arrière Remarque : Ne jamais Ouvertures obstruer les ouvertures de de ventilation ventilation car cela peut entraîner une surchauffe à l'intérieur du moniteur et conduire un dysfonction- nement Connecteur d'alimentation Le cordon d'alimentation est raccordé...
  • Seite 60: Raccordement, Activation Et Désactivation Du Moniteur

    All manuals and user guides at all-guides.com Raccordement, activation et désactivation du moniteur Raccordement du moniteur à un Activation de l'alimentation ordinateur (PC, etc.) 1. Mettre l'interrupteur principal en position ON. Lors du raccordement, s'assurer que l'alimentation tant du moniteur que de l'ordinateur est désactivée. Insérer fermement la borne de sortie analogique RGB (mini D-sub à...
  • Seite 61 All manuals and user guides at all-guides.com Raccordement, activation et désactivation du moniteur Pour Windows 95 4. Lorsque [Models] apparaît, cliquer sur [Have Disk], confirmer que le [Copy manufacturer's files Installation de l'information relative à l'installation du from:] est [A:] et ensuite cliquer sur [OK]. moniteur sous Windows 95.
  • Seite 62 All manuals and user guides at all-guides.com Raccordement, activation et désactivation du moniteur Pour Windows 2000 2. Cocher la case [Specify the location of the driver [Advanced]] et cliquer [Next]. Installation de l'information relative à l'installation du 3. Cocher la case [Display a list of all the drivers in moniteur sous Windows 2000.
  • Seite 63: Désactivation De L'alimentation

    All manuals and user guides at all-guides.com Raccordement, activation et désactivation du moniteur Remarques : Désactivation de l'alimentation • Il convient d’utiliser un câble USB dont la longueur ne dépasse pas trois mètres. 1. Mettre l'ordinateur hors tension. • Avant toute connexion, s'assurer que la forme du 2.
  • Seite 64: Réglage De L'image Au Moniteur

    All manuals and user guides at all-guides.com Réglage de l'image au moniteur Si nécessaire, le moniteur peut être réglé comme Réglage automatique du moniteur suit. Réglage automatique du moniteur (colonne droite) Les options du MENU 1 (RÉGLAGE L'horloge, la phase, le H-POS (positionnement (ADJUSTMENT)) peuvent être ajustées automati- horizontal) et le V-POS (positionnement vertical) quement (horloge, phase, positionnements horizon-...
  • Seite 65: Réglage Du Rétro-Éclairage

    • Réglage fin on peut se servir du Modèle de réglage se trouvant sur la disquette de réglage des paramètres du Pour le modèle LL-T1501A moniteur. Les réglages peuvent être effectués comme suit : Les messages Windows mentionnés dans le mode •...
  • Seite 66: Réglage Manuel Du Moniteur

    All manuals and user guides at all-guides.com Réglage de l'image au moniteur Méthode facile de changement de la luminosité Réglage manuel du moniteur (LL-T1511A uniquement.) La luminosité peut être modifiée sur n'importe lequel Des réglages fins peuvent être effectués au moyen de ces trois paramètres.
  • Seite 67 All manuals and user guides at all-guides.com Réglage de l'image au moniteur MENU 1: ADJUSTMENT MENU 2: GAIN CONTROL Le BLACK LEVEL et le CONTRAST sont optimisés avant expédition, mais en fonction de l'ordinateur qui va être utilisé, des réglages supplémentaires seront peut-être nécessaires.
  • Seite 68 All manuals and user guides at all-guides.com Réglage de l'image au moniteur DISPLAY COLORS MENU 4: MODE SELECT Des couleurs maximales d'affichage peuvent être définies. 260K (260.000) et 16M (16,19 millions) S CAL I NG MENU 3: WHITE BALANCE La WHITE BALANCE (nuances des couleurs) peut V 6 0 8 H z être réglée si nécessaire.
  • Seite 69: Entretien Et Réparation Du Moniteur

    Section de l'écran LCD du tube fluorescent. Se renseigner auprès du Section de l'écran LCD revendeur ou du centre Sharp agréé le plus Utiliser un chiffon doux et sec pour éliminer les proche. (Ne jamais tenter d'effectuer ce poussières de la surface vitrée (écran) du moniteur.
  • Seite 70: Caractéristiques Techniques

    All manuals and user guides at all-guides.com Caractéristiques techniques Caractéristiques techniques du produit Élément Caractéristique technique LL-T1511A LL-T1501A Moniteur LCD Module TFT à cristaux liquides Module TFT à cristaux liquides de 38 cm (15 pouces) Super V et anti-éblouissement, anti-reflet de 38 cm (15 pouces) Définition...
  • Seite 71 All manuals and user guides at all-guides.com Caractéristiques techniques Fréquence des signaux Fréquence par Mode affichage Hsync (kHz) Vsync (Hz) point (MHz) 31,5kHz 60Hz 25,175MHz 640x480 37,9kHz 72Hz 31,5MHz 37,5kHz 75Hz 31,5MHz VESA 35,1kHz 56Hz 36,0MHz 37,9kHz 60Hz 40,0MHz 800x600 48,1kHz 72Hz 50,0MHz...
  • Seite 72: Gestion De L'alimentation

    All manuals and user guides at all-guides.com Caractéristiques techniques Gestion de l'alimentation Canal de transfert de données d'affichage (Plug & Play) Le moniteur est basé sur un système VESA DPMS (signalisation de la gestion d'alimentation de l'affi- Ce moniteur supporte la norme VESA DDC (Canal chage).
  • Seite 73: Instructions Relatives À L'installation D'un Bras Conforme Vesa

    All manuals and user guides at all-guides.com Instructions relatives à l'installation d'un bras conforme VESA Un bras ou un support conforme à la norme VESA 4. Retirer le couvercle du connecteur. (à acheter séparément) peut servir de support au Retirer les vis et lever. moniteur.
  • Seite 74 All manuals and user guides at all-guides.com Instructions relatives à l'installation d'un bras conforme VESA 9. Tout en prenant garde de ne pas endommager le 11.Fixer le bras au moniteur à l'aide de quatre vis. moniteur, étendre un chiffon et y déposer le moniteur l'écran tourné...
  • Seite 75 All manuals and user guides at all-guides.com Indice Avviso per gli utenti negli in USA ............76 TCO'99 .
  • Seite 76: Avviso Per Gli Utenti Negli In Usa

    Sharp Plaza, Mahwah, New Jersey 07430 TEL :1-800-BE-SHARP * Nella sua qualità di partner dell'ENERGY STAR, la SHARP ha accertato che questo prodotto soddisfa le esigenze poste dalle direttive ENERGY STAR per la gestione efficiente dell'energia. Questo prodotto utilizza una lega per saldatura allo stagno-piombo ed una lampada fluorescente conte- nente una piccola quantità...
  • Seite 77 All manuals and user guides at all-guides.com Congratulazioni! Lei ha appena acquistato un prodotto riconosciuto e approvato con marchio TCO'99! Scegliendo questo prodotto, Lei ha acquistato uno strumento d'uso professionale ed ha contribuito a diminuire la presenza nell'ambiente di sostanze nocive favorendo lo sviluppo di prodotti elettronici adattati, per un maggior rispetto ambientale.
  • Seite 78: Tco'99

    All manuals and user guides at all-guides.com TCO Development SE-114 94 Stockholm, Sweden Fax: +46 8 782 92 07 Email (Internet): development@tco.se È possibile inoltre ricevere via Internet le informazioni relative ai prodotti approvati e dotati di marchio TCO'99 scrivendo all'indirizzo: http://www.tco-info.com/ Requisiti ambientali Additivi ignifughi Gli additivi ignifughi sono presenti nelle schede a circuito stampato, nei cavi, nei rivestimenti e negli...
  • Seite 79: Avviso Per Gli Utenti In Europa

    All manuals and user guides at all-guides.com Avviso per gli utenti in Europa This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC as amended by 93/68/EEC. Dieses Gerät entspricht den Anforderungen der EG-Richtlinien 89/336/EWG und 73/23/EWG mit Änderung 93/68/EWG. Ce matériel répond aux exigences contenues dans les directives 89/336/CEE et 73/23/CEE modifiées par la directive 93/68/CEE.
  • Seite 80: Avviso Per Gli Utenti Nel Regno Unito

    Per il servizio di assistenza tecnica , qualora se ne presentasse la necessità, per favore mettetevi in contatto con il vostro rivenditore oppure con la Sharp Corporation of Australia sull'1 300 13 50 22 per farvi indirizzare al Centro del Servizio Tecnico Assistenza Clienti autorizzato più vicino a voi.
  • Seite 81: Suggerimenti E Precauzioni Per La Sicurezza

    • Vi si suggerisce di conservare il cartone per il • Per favore abbiate comprensione per il fatto che caso in cui risulti necessario trasportare il moni- la Sharp Corporation non si assume nessuna tor. responsabilità per errori fatti nell'uso da parte del •...
  • Seite 82: Descrizione Del Prodotto

    All manuals and user guides at all-guides.com Descrizione del prodotto Vista frontale LL-T1511A LL-T1501A 6 5 4 3 5 4 3 1. Tasto di alimentazione (POWER) Premendo questo tasto si accende l'alimentazione, se l'interruttore principale rete (p. 83) è acceso. (Dopo aver acceso l'alimentazione, potrà...
  • Seite 83 All manuals and user guides at all-guides.com Descrizione del prodotto Vista posteriore Nota: non ostruite mai i fori Fori per la per la ventilazione, in quanto ventilazione ciò può provocare un surriscaldamento all'interno del monitor e dare luogo a disturbi al funzionamento. Connettore dell'alimentazione Il cavo dell'alimentazione rete si collega a questo connettore...
  • Seite 84: Collegamento Del Monitor Ed Accensione E Spegnimento Del Monitor

    All manuals and user guides at all-guides.com Collegamento del monitor ed accensione e spegnimento del monitor Collegamento del monitor ad un Accensione computer (PC ecc.) 1. Posizionate su acceso l'interruttore principale rete del monitor. Quando eseguite i collegamenti, assicuratevi che sia il monitor che il computer siano spenti.
  • Seite 85 All manuals and user guides at all-guides.com Collegamento del monitor ed accensione e spegnimento del monitor Per Windows95 4. Quando viene visualizzato [Models], fate clic su [Have Disk], confermate che [Copy Installazione delle informazioni per il setup del manufacturer's files from:] è [A:], e fate clic su monitor in Windows95.
  • Seite 86 All manuals and user guides at all-guides.com Collegamento del monitor ed accensione e spegnimento del monitor Per Windows2000 2. Spuntate [Specify the location of the driver [Advanced]] e fate clic su [Next]. Installazione delle informazioni per il setup del 3. Spuntate [Display a list of all the drivers in a monitor in Windows2000.
  • Seite 87: Spegnimento

    All manuals and user guides at all-guides.com Collegamento del monitor ed accensione e spegnimento del monitor Note: Spegnimento • Per favore utilizzate un cavo USB di lunghezza inferiore a 3 metri. 1. Spegnete il computer • Prima di eseguire il collegamento, assicuratevi 2.
  • Seite 88: Regolazione Della Visualizzazione Sullo Schermo

    All manuals and user guides at all-guides.com Regolazione della visualizzazione sullo schermo Se necessario, è possibile regolare lo schermo come Regolazione automatica dello schermo segue. Regolazione automatica dello schermo (colonna Le opzioni nel MENU 1 (ADJUSTMENT destra) (REGOLAZIONE)) si possono regolare automatica- Le funzioni clock, fase, H-POS (posizionamento mente (clock, fase, H-POS V-POS).
  • Seite 89: Regolazione Della Retroilluminazione

    All manuals and user guides at all-guides.com Regolazione della visualizzazione sullo schermo Apertura del monoscopio (per Windows) Per LL-T1501A La regolazione si può fare nel modo seguente: Se utilizzate Windows, potete utilizzare il • Regolazione fine monoscopio sul dischetto allegato per la regolazione delle impostazioni del monitor.
  • Seite 90: Regolazione Manuale Dello Schermo

    All manuals and user guides at all-guides.com Regolazione della visualizzazione sullo schermo Passi facili per variare la luminosità (Solo LL- Regolazione manuale dello schermo T1511A.) La luminosità si può variare portandola su una Regolazioni fini si possono fare mediante il menu On qualsiasi di tre impostazioni.
  • Seite 91 All manuals and user guides at all-guides.com Regolazione della visualizzazione sullo schermo MENU 1: ADJUSTMENT MENU 2: GAIN CONTROL BLACK LEVEL e CONTRAST vengono ottimizzati prima della spedizione, ma, a seconda del tipo di computer usato, potrebbero rendersi necessarie ulteriori regolazioni. G A I RO L BLACK LEVEL...
  • Seite 92 All manuals and user guides at all-guides.com Regolazione della visualizzazione sullo schermo DISPLAY COLORS MENU 4: MODE SELECT Si può impostare il numero massimo dei colori del display. 260K (260,000) e 16M (16.19 milioni) S CAL I NG MENU 3: WHITE BALANCE WHITE BALANCE (tonalità...
  • Seite 93: Cura E Riparazione Del Monitor

    ATTENZIONE! autorizzato del Servizio Tecnico Assistenza Clienti della Sharp. (Non tentate mai di fare la • Non usate mai dei solventi, della benzina, sostituzione da voi.) dell'alcol, del detersivo per vetri, ecc. in quando •...
  • Seite 94: Specifiche

    All manuals and user guides at all-guides.com Specifiche Specifiche del prodotto Voce Specifica Nome LL-T1511A LL-T1501A Display LCD Modulo TFT LCD da 38 cm Modulo TFT LCD da 38 cm (15 pollici) Super V ed anti (15 pollici) abbagliamento a bassa riflessione...
  • Seite 95 All manuals and user guides at all-guides.com Specifiche Sincronizzazione dei segnali Modalità di visualizzazione Frequenza Frequenza Frequenza orizzontale (kHz) verticale (Hz) punti (MHz) 31,5kHz 60Hz 25,175MHz 640x480 37,9kHz 72Hz 31,5MHz 37,5kHz 75Hz 31,5MHz VESA 35,1kHz 56Hz 36,0MHz 37,9kHz 60Hz 40,0MHz 800x600 48,1kHz 72Hz...
  • Seite 96 All manuals and user guides at all-guides.com Specifiche Gestione dell'energia DDC (Plug & Play) Il monitor è basato su VESA DPMS (Display Power Questo monitor supporta lo standard VESA DDC Management Signaling) (Segnalazioni della gestione (Display Data Channel). dell'energia del display). DDC è...
  • Seite 97: Istruzioni Per L'installazione Di Un Braccio Compatibile Vesa

    All manuals and user guides at all-guides.com Istruzioni per l'installazione di un braccio compatibile VESA Un braccio oppure un supporto basato sullo 4. Rimuovete la copertura del connettore. standard VESA (acquistato separatamente) si può Rimuovete le viti e sollevatela verso l'alto. collegare al monitor.
  • Seite 98 All manuals and user guides at all-guides.com Istruzioni per l'installazione di un braccio compatibile VESA 9. Facendo attenzione a non danneggiare il monitor, 11.Attaccate il braccio al monitor con quattro viti. stendete un panno morbido ed appoggiate su di esso il monitor con il lato display verso il basso. 10.Rimuovete le quattro viti e rimuovete quindi il supporto dal monitor.
  • Seite 99 All manuals and user guides at all-guides.com Índice Nota para usuarios en EE.UU............100 TCO'99 .
  • Seite 100: Nota Para Usuarios En Ee.uu

    Sharp Plaza, Mahwah, New Jersey 07430 TEL :1-800-BE-SHARP * Como empresa asociada a ENERGY STAR, SHARP certifica que el presente producto cumple las directivas de ENERGY STAR sobre el ahorro energético. El presente producto se sirve de soldador de hilo de estaño y lámpara fluorescente que contiene una pequeña cantidad de mercurio.
  • Seite 101: Tco'99

    All manuals and user guides at all-guides.com ¡Enhorabuena! Acaba de adquirir un producto certificado y homologado conforme a TCO'99. Con el mismo se ha decidido por un producto diseñado para aplicaciones profesionales. Su compra también ha contribuido a reducir las cargas medioambientales al igual que al desarrollo posterior de productos electrónicos de compatibilidad ecológica.
  • Seite 102 All manuals and user guides at all-guides.com TCO Development SE-114 94 Stockholm, Sweden Fax: +46 8 782 92 07 Email (Internet): development@tco.se Información actualizada sobre los productos aprobados y homologados por TCO pueden también obtenerse vía Internet bajo la dirección; http://www.tco-info.com// Requisitos medioambientales Productos antiinflamantes Los productos antiinflamantes se encuentran en las placas de circuitos impresos, cables, hilos, cajas y...
  • Seite 103: Nota Para Usuarios En Europa

    All manuals and user guides at all-guides.com Nota para usuarios en Europa This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC as amended by 93/68/EEC. Dieses Gerät entspricht den Anforderungen der EG-Richtlinien 89/336/EWG und 73/23/EWG mit Änderung 93/68/EWG. Ce matériel répond aux exigences contenues dans les directives 89/336/CEE et 73/23/CEE modifiées par la directive 93/68/CEE.
  • Seite 104: Nota Para Usuarios En El Reino Unido

    Nota para usuarios en Australia Consultas sobre el servicio Sírvase consultar con su proveedor para todo lo relacionado con el servicio técnico o contacte con Sharp Corporation of Australia, tel. 1300 13 50 22, para información sobre el centro de asistencia técnica Sharp...
  • Seite 105: Sugerencias Y Precauciones De Seguridad

    Windows quedan producto que pudieran resultar durante el funcio- reservados a favor de Sharp Corporation. No lo namiento excepto en los casos donde la respon- reproduzca sin previa autorización.
  • Seite 106: Descripción Del Producto

    All manuals and user guides at all-guides.com Descripción del producto LL-T1511A LL-T1501A Vista delantera 6 5 4 3 5 4 3 1. Botón conmutador La pulsación de este botón conmuta la corriente cuando el interruptor primario (pág. 107) está activado. (Tras conmutar la corriente, puede durar un poco hasta que la pantalla esté...
  • Seite 107 All manuals and user guides at all-guides.com Descripción del producto Vista trasera Nota: No bloquee jamás los Orificios de orificios de ventilación ya ventilación que ello puede conducir a calentamiento excesivo en el interior del monitor y resultar en funcionamiento anómalo Conector de corriente El cable de alimentación...
  • Seite 108: Conexión Del Monitor Y Conmutación/Desconmutación Del Mismo

    All manuals and user guides at all-guides.com Conexión del monitor y conmutación/ desconmutación del mismo Conexión del monitor a un ordenador Conexión de la corriente (PC, etc.) 1. Conmute el interruptor primario del monitor. Al realizar la conexión, asegúrese de que tanto el monitor como el ordenador están desconmutados.
  • Seite 109 All manuals and user guides at all-guides.com Conexión del monitor y conmutación/desconmutación del mismo Para Windows95 4. Cuando aparezca [Models], haga clic sobre [Have Disk], confirme que [Copy manufacturer's Instalación de la información de configuración del files from:] es [A:] y haga clic sobre [OK]. monitor en Windows95.
  • Seite 110 All manuals and user guides at all-guides.com Conexión del monitor y conmutación/desconmutación del mismo Para Windows2000 2. Compruebe [Specify the location of the driver [Advanced]] y haga clic sobre [Next]. Instalación de la información de configuración del 3. Compruebe [Display a list of all the drivers in a monitor en Windows2000.
  • Seite 111: Desconexión De La Corriente

    All manuals and user guides at all-guides.com Conexión del monitor y conmutación/desconmutación del mismo Notas: Desconexión de la corriente • Sírvase emplear un cable USB de longitud inferior a 3 metros. 1. Desconmute el ordenador. • Antes de realizar la conexión, cerciórese de que 2.
  • Seite 112: Ajuste De La Pantalla

    All manuals and user guides at all-guides.com Ajuste de la pantalla Si fuese necesario, la pantalla puede regularse como Regulación automática de la pantalla sigue. Regulación automática de la pantalla (columna Las opciones en el MENÚ 1 (ADJUSTE) pueden derecha) regularse automáticamente (reloj, fase, Las funciones reloj, fase, H-POS (posición horizontal) H-POS V-POS).
  • Seite 113: Regulación De La Retroiluminación

    All manuals and user guides at all-guides.com Ajuste de la pantalla Apertura de la carta de ajuste (para Windows) Para LL-T1501A El ajuste puede realizarse de la forma siguiente: Si está operando bajo Windows, puede servirse de • Ajuste de precisión la carta de ajustes que incluye el disquete de configuración del monitor adjunto.
  • Seite 114: Ajuste Manual De La Pantalla

    All manuals and user guides at all-guides.com Ajuste de la pantalla Algunos sencillos pasos para modificar la Ajuste manual de la pantalla luminosidad (Sólo LL-T1511A.) La luminosidad puede cambiarse a uno cualquiera Los ajustes de precisión pueden realizarse median- de los tres ajustes. te el menú...
  • Seite 115 All manuals and user guides at all-guides.com Ajuste de la pantalla MENU 1: ADJUSTMENT MENU 2: GAIN CONTROL BLACK LEVEL y CONTRAST salen de fábrica optimizados pero, en función del ordenador emplea- do, pueden requerirse ajustes adicionales. G A I RO L BLACK LEVEL CONTRAST...
  • Seite 116 All manuals and user guides at all-guides.com Ajuste de la pantalla DISPLAY COLORS MENU 4: MODE SELECT Puede activarse el máximo de colores de pantalla. 260K (260,000) y 16M (16,19 millones) MENU 3: WHITE BALANCE S CAL I NG El WHITE BALANCE (tonalidad cromática) puede regularse como se estime necesario.
  • Seite 117: Conservación Y Reparación Del Monitor

    Sírvase de un paño suave y seco para limpiar tomar contacto con su proveedor o con el servicio ligeramente la caja y el panel de control. autorizado de asistencia técnica de Sharp más Si se encontrara demasiado sucia, aplique un cercano.
  • Seite 118: Especificaciones

    All manuals and user guides at all-guides.com Especificaciones Especificaciones del producto Componente Especificación LL-T1501A Designación LL-T1511A Módulo TFT LCD 38 cm (15 Display LCD Módulo TFT LCD 38 cm (15 pulgadas) pulgadas) Super-V y Anti Glare Low Reflection (baja reflexión antideslumbramiento) Retícula...
  • Seite 119 All manuals and user guides at all-guides.com Especificaciones Sincronización de señal Frecuencia Modo display Hsync (kHz) Vsync (Hz) (MHz) 31,5kHz 60Hz 25,175MHz 640x480 37,9kHz 72Hz 31,5MHz 37,5kHz 75Hz 31,5MHz VESA 35,1kHz 56Hz 36,0MHz 37,9kHz 60Hz 40,0MHz 800x600 48,1kHz 72Hz 50,0MHz 46,9kHz 75Hz 49,5MHz...
  • Seite 120 All manuals and user guides at all-guides.com Especificaciones Gestión energética DDC (Plug & Play) El monitor está basado en la tecnología VESA Este monitor soporta el estándar VESA DDC (Dis- DPMS (Display Power Management Signaling). play Data Channel). Para activar la función Power Management del DDC es un estándar de señalización para la ejecu- monitor, tanto la tarjeta vídeo como el ordenador ción de las funciones Plug &...
  • Seite 121: Instrucciones Para La Instalación De Un Brazo De Compatibilidad Vesa

    All manuals and user guides at all-guides.com Instrucciones para la instalación de un brazo de compatibilidad VESA Al monitor puede instalarse un brazo o base confor- 4. Retire la cubierta del conector. me al estándar VESA (de adquisición por separado). Retire los tornillos y levante hacia arriba Para la instalación del brazo se requiere un adapta- dor CA (de adquisición por separado).
  • Seite 122 All manuals and user guides at all-guides.com Instrucciones para la instalación de un brazo de compatibilidad VESA 9. Prestando atención a no dañar el monitor, 11.Fije el brazo al monitor con los cuatro tornillos. extienda un paño suave y coloque el monitor sobre el mismo con la pantalla señalando hacia abajo 10.Retire los cuatro tornillos y, a continuación, retire...
  • Seite 123 All manuals and user guides at all-guides.com...
  • Seite 124 All manuals and user guides at all-guides.com SHARP CORPORATION © 2001 SHARP CORPORATION Printed in China 624315080010 0LTHG15080010 (1)

Diese Anleitung auch für:

Ll-t1511aLl-t1501

Inhaltsverzeichnis