Precautions - Panasonic CF-VEB Serie Bedienungsanleitung

Precautions

Do not place metal objects or containers of
liquid on top of the port replicator.
If paper clips, coins, or other metal objects, or
water or other liquid spills, get inside the port
replicator, fire or electric shock may result.
Immediately unplug the AC cord and remove the
computer from the port replicator. Then, contact
Panasonic Technical Support.
If these malfunctions occur, immediately
unplug the AC cord and remove the computer
from the port replicator.
• The port replicator is damaged
• A foreign object is inside port replicator
• Smoke is emitted
• An unusual smell is emitted
E
• The port replicator is unusually hot
Continuing to use the port replicator while any
of the above conditions are present may result in
fire or electric shock.
If these malfunctions occur, immediately unplug
the AC cord and remove the computer from the
port replicator. Then, contact Panasonic
Technical Support.
Do not touch the port replicator and cable
during an electrical storm.
Electric shock may result.
Do not place the port replicator in an unstable
location.
If it becomes unbalanced, it could fall over or
drop, potentially causing an injury.
6
Do not connect a telephone line, or a network
cable other than the one specified, to the LAN
port.
If the LAN port is connected to a network such
as the ones listed below, a fire or electric shock
may result.
• Networks other than 1000BASE-T, 100BASE-
TX or 10BASE-T
*1
• Phone lines (IP phone (Internet Protocol
Telephone), conventional external telephone
lines, internal phone lines (on-premise
switches), digital public phones, etc.)
The specification will change depending on the
*1
models.
Avoid Liquids, Humidity, Dust and Oil smoke.
Continuing to use the port replicator while any
of the above conditions are present may result in
fire or electric shock.
Do not leave the port replicator in the car under
flaming sun for a long period of time.
The heat may damage the container and some
parts inside the port replicator.
Continuing to use the port replicator under such
a condition may cause a short circuit or insulation
malfunction etc, which may result in a fire or
electric shock.