Panasonic CF-VEB Serie Bedienungsanleitung Seite 11

Disconnecting
CAUTION
Do not connect or disconnect the port replicator while the computer is powered on or
in the standby or hibernation mode.
1
Turn the computer off.
(If the port replicator is locked, unlock it.)
2
Slide the lever completely to the right side (UNDOCK
POSITION) to disconnect the expansion bus connector
of the port replicator.
3
Lift the rear corners, then release the computer from the
port replicator.
4
Close the expansion bus connector cover of the computer.
Expansion Bus Connector Cover
E
11