Panasonic CF-VEB Serie Bedienungsanleitung Seite 11

Disconnecting
CAUTION
Do not connect or disconnect the port replicator while the computer is powered on or
in the standby or hibernation mode.
1
Turn off the computer.
2
While holding the latch to the right side,
1
slide the lever all the way back
2
TION)
The back side of the computer lifts up, so remove
3
this portion.
3
Close the cover of the expansion bus connector of the
computer.
4
Attach the protective cap to the expansion bus connector
of the port replicator.
.
(UNDOCK POSI-
1
3
Lever
Latch
Expansion Bus Connector
E
2
11