Adjusting The Size Of The Picture (Size/Center); Adjusting The Centering Of The Picture (Size/Center); Enlarging Or Reducing The Picture (Zoom); Adjusting The Shape Of The Picture (Geometry) - Sun Microsystems GDM-5410 Anleitung

Adjusting the size of the picture
(SIZE/CENTER)
This setting is stored in memory for the current input signal.
1
Press the button.
The main MENU appears on the screen.
Press the m/M buttons to highlight
2
and press the button again.
The SIZE/CENTER menu appears on the screen.
First press the m/M buttons to select
3
horizontal adjustment, or
Then press the </, buttons to adjust the size.
Adjusting the centering of the
picture (SIZE/CENTER)
This setting is stored in memory for the current input signal.
1
Press the button.
The main MENU appears on the screen.
Press the m/M buttons to highlight
2
and press the button again.
The SIZE/CENTER menu appears on the screen.
First press the m/M buttons to select
3
horizontal adjustment, or
Then press the </, buttons to adjust the
centering.
Enlarging or reducing the picture
(ZOOM)
This setting is stored in memory for the current input signal.
1
Press the button.
The main MENU appears on the screen.
Press the m/M buttons to highlight
2
CENTER and press the
The SIZE/CENTER menu appears on the screen.
Press the m/M buttons to select
3
press the </, buttons to enlarge or reduce the
picture.
Note
Adjustment stops when either the horizontal or vertical size reaches its
maximum or minimum value.
10
SIZE/CENTER
for
for vertical adjustment.
SIZE/CENTER
for
for vertical adjustment.
SIZE/
button again.
(zoom), and
Adjusting the shape of the picture
(GEOMETRY)
The GEOMETRY settings allow you to adjust the rotation and
shape of the picture.
The (rotation) setting is stored in memory for all input signals.
All other settings are stored in memory for the current input
signal.
1
Press the button.
The main MENU appears on the screen.
Press the m/M buttons to highlight
2
and press the button again.
The GEOMETRY menu appears on the screen.
First press the m/M buttons to select the desired
3
adjustment item. Then press the </, buttons to
make the adjustment.
Select To
rotate the picture
expand or contract the picture sides
shift the picture sides to the left or right
adjust the picture width at the top of the screen
shift the picture to the left or right at the top of the
screen
GEOMETRY