Self-Diagnosis Function; Specifications - Sun Microsystems GDM-5410 Anleitung

Self-diagnosis function

This monitor is equipped with a self-diagnosis function. If there is
a problem with your monitor or computer(s), the screen will go
blank and the 1 (power) indicator will either light up green or
flash amber. If the 1 (power) indicator is lit in amber, the
computer is in power saving mode. Try pressing any key on the
keyboard.
1 (power) indicator
If the 1 (power) indicator is green
1
Remove any plugs from the video input 1 and 2
connectors, or turn off the connected computer(s).
Press the 1 1 1 1 (power) button twice to turn the monitor
2
off and then on.
Press the , button for 2 seconds before the
3
monitor enters power saving mode.
If all four color bars appear (white, red, green, blue), the monitor
is working properly. Reconnect the video input cables and check
the condition of your computer(s).
If the color bars do not appear, there is a potential monitor failure.
Inform your service representative of the monitor's condition.
If the 1 (power) indicator is flashing amber
Press the 1 (power) button twice to turn the monitor off
and then on.
If the 1 (power) indicator lights up green, the monitor is working
properly.
If the 1 (power) indicator is still flashing, there is a potential
monitor failure. Count the number of seconds between amber
flashes of the 1 (power) indicator and inform your service
representative of the monitor's condition. Be sure to note the
model name and serial number of your monitor. Also note the
make and model of your computer and video board.
18

Specifications

CRT 0.24 mm aperture grille pitch
21 inches measured diagonally
90-degree deflection
FD Trinitron
Approx. 403.8 × 302.2 mm (w/h)
Viewable image size
(15.9 × 11.9 inches)
19.8" viewing image
Recommended resolution Horizontal: 1280 dots
Vertical: 1024 lines
Approx. 388 × 291 mm (w/h)
Standard image area
(15
or
Approx. 364 × 291 mm (w/h)
(14
Deflection frequency* Horizontal: 30 to 121 kHz
Vertical: 48 to 160 Hz
AC input voltage/current 100 to 240 V, 50 – 60 Hz, 2.0 – 1.0 A
Power consumption Approx. 145 W
Approx. 501 × 498 × 498 mm (w/h/d)
Dimensions
(19
Mass Approx. 32 kg (70 lb 9 oz)
Plug and Play DDC1/2B/2Bi, GTF**
* Recommended horizontal and vertical timing condition
• Horizontal sync width duty should be more than 4.8% of total
horizontal time or 0.8 µs, whichever is larger.
• Horizontal blanking width should be more than 2.3 µsec.
• Vertical blanking width should be more than 450 µsec.
** If the input signal is Generalized Timing Formula (GTF)
compliant, the GTF feature of the monitor will automatically
provide an optimal image for the screen.
Design and specifications are subject to change without notice.
× 11
1 1
/ / inches)
4 2
× 11
3 1
/ / inches)
8 2
× 19 × 19
3 5 5
/ / / inches)
4 8 8