Identifying Parts And Controls - Sun Microsystems GDM-5410 Anleitung

Identifying parts and controls

See the pages in parentheses for further details.
Front
1 1
1 1
(reset) button (page 14)
This button resets the adjustments to the factory settings.
2 2 2 2
(input) button and 1 (13W3) / 2 (HD15) indicators
(page 7)
This button selects the 1 (13W3) or 2 (HD15) video input
signal.
Each time you press this button, the input signal and
corresponding indicator alternate.
3 3 1 (power) switch and indicator (pages 6, 14, 18) 3 3
This button turns the monitor on and off. The power indicator
lights up in green when the monitor is turned on, and either
flashes in green and amber, or lights up in amber when the
monitor is in power saving mode.
4 4 (brightness) m/M buttons (page 9)
4 4
7KHVHýEXWWRQVýGLVSOD\ýWKHý%5,*+71(66î&2175$67ýPHQXý
DQGýIXQFWLRQýDVýWKHýmîMýýEXWWRQVýZKHQýVHOHFWLQJýPHQXýLWHPVï
5 5
5 5
(menu) button (page 9)
This button displays the main menu.
6 6 6 6 6 (contrast) </, buttons (page 9) 6
6 6
These buttons display the BRIGHTNESS/CONTRAST menu
and function as the </, buttons when making adjustments.
7 7
7 7
ASC (auto sizing and centering) button (page 7)
This button automatically adjusts the size and centering of the
picture.
8 8 AC IN connector (page 6) 8 8
This connector provides AC power to the monitor.
Rear (with the cover opened)
9 Video input 2 connector (HD15) (page 6) 9
9 9
This connector inputs RGB video signals (0.700 Vp-p,
positive) and sync signals.
q; Video input 1 connector (13W3) (page 6) q;
q; q;
This connector inputs RGB video signals (0.700 Vp-p,
positive) and sync signals.
9 HD15 0 13W3
5 4 3 2 1
10 9 8 7 6
15 14 13 12 11
No. 9 9 Signal
9 9
A1 –––
A2 –––
A3 –––
1 Red
2 Green
(Sync on Green)
3 Blue
4 ID (Ground)
5 DDC Ground*
6 Red Ground
7 Green Ground
8 Blue Ground
9 DDC + 5V*
10 Ground
11 ID (Ground)
12 Bi-Directional Data (SDA)* –––
13 H. Sync
14 V. Sync
15 Data Clock (SCL)*
* DDC (Display Data Channel) is a standard of VESA.
**Pins serve a dual purpose as combined sync input and as H.sync input
if V.Sync is present on pin no. 7.
5 4 3 2 1
10 9 8 7 6
A3 A2 A1
0 Signal 0
0 0
Red
Green
Blue
Data Clock (SCL)*
DDC + 5V*
–––
DDC Ground*
C Sync**
Bi-Directional Data
(SDA)*
V. Sync
ID (100Ω)
ID (100Ω)
Ground
–––
–––
–––
–––
5
EN