Resetting The Adjustments; Technical Features; Power Saving Function - Sun Microsystems GDM-5410 Anleitung

Resetting the adjustments

This monitor has the following three reset methods. Use the
(reset) button to reset the adjustments.
Resetting a single adjustment item
, m/M buttons to select the adjustment item you want
Use the
to reset, and press the (reset) button.
Resetting all of the adjustment data for the
current input signal
Press the (reset) button when no menu is displayed on the
screen.
Note that the following items are not reset by this method:
• on-screen menu language (page 7)
• adjustment mode in the COLOR menu (EASY, EXPERT,
sRGB) (page 12)
• on-screen menu position (page 13)
• control lock (page 13)
Resetting all of the adjustment data for all input
signals
Press and hold the (reset) button for more than two seconds.
Note
The (reset) button does not function when
LOCK) is set to ON.
14

Technical Features

Power saving function

This monitor meets the power-saving guidelines set by VESA,
E
NERGY
monitor from the connected computer, the monitor will
automatically reduce power consumption as shown below.
Power mode Power consumption
normal
operation
active off*
power off
* When your computer enters the "active off" mode, the input signal to
the monitor is cut off and "NO INPUT SIGNAL" appears on the screen.
After an interval, the monitor enters power saving mode.
(CONTROL
S
TAR, and NUTEK. If no signal is received by the
≤ 160 W
≤ 3 W
< 1 W
1 (power)
indicator
green
amber
off