Process (2/2)" Screen - JVC KY-F560 Bedienungsanleitung

5. Setting Via the Menu Screen (continued)

"PROCESS (2/2)" Screen

Settings in bold are factory settings
Item
"CINEMA"
"COLOR
MATRIX"
"ADJUST.."
"GAMMA"
"LEVEL"
E-38
"OFF" : Disabled.
"ON" : Switches to a gamma curve that is similar to the screen
characteristics of movies.
Colour matrix switches to the "CINEMA" mode.
For setting colour matrix.
"OFF" : Disabled.
"STANDARD" : Sets to standard colour matrix.
"WARM" : Sets to a reddish tone.
"EXT1-3" : Sets to a colour matrix other than those above.
Select according to your preference.
"MANUAL" : Sets colour matrix to the manual adjustment mode.
Note
When the "CINEMA" item is set to "ON", "(CINEMA)" is displayed and setting is
disabled. ("EXT2" is equivalent to the "CINEMA" mode.)
This can be selected only when the "COLOR MATRIX" item is set to "MANUAL".
Press the [SET] button to invoke the "MATRIX ADJUST" screen.
☞ Page 40 'MATRIX ADJUST Screen'
For adjusting the gamma curve that determines the reproducibility of black colour.
"OFF" : Disables gamma curve adjustment.
"MANUAL" : Amount of gamma curve adjustment can be altered using the
"LEVEL" item.
"CINEMA" : Switches to a gamma curve that is similar to the screen
characteristics of movies.
Note
When the "CINEMA" item is set to "ON", "(CINEMA)" is displayed and setting is
disabled.
Gamma curve adjustment is enabled only when the "GAMMA" item is set to
"MANUAL".
Increase value : Enhances gradation of black. However, gradation of bright
portions will deteriorate.
Decrease value : Enhances gradation of bright portions. However, gradation of
black will deteriorate.
{Variable Values : –5 - 0 - +5}
Note
Displayed as "- - - - - -" when the "GAMMA" item is set to "OFF" or "CINEMA".
Function/Variable Values