Setting Procedures - JVC KY-F560 Bedienungsanleitung

5. Setting Via the Menu Screen (continued)

Setting Procedures

The various functions of this unit can be set using the menu screen. Settings will be stored in the memory of
this unit and will remain recorded when the power is turned off.
[ ]
[MENU]
AW BARS
MENU
REMOTE
GENLOCK IN
1.
- - - MENU - - -
EXPOSURE . .
WH I TE BA L ANCE . .
PROCESS . .
SYSTEM . .
F I L E M ANAGE . .
EX I T
"MENU" Screen
2.
- - - EXPOSURE - - -
I R I S MODE
MA N U A L L EVE L
GA I N
L EV L E
SHUT TER
L EVE L
ADVANCED EXPOSURE . .
PAGE BACK
"EXPOSURE" Screen (Example)
(Submenu Screen)
E-30
1.
[ ]
2.
[SET]
3.
SET
LENS
4.
VIDEO OUT
5.
AUTO
- - - - - -
ST E P
0 d B
STEP
NO R M A L
Press the [MENU] button for 1-2 seconds.
The "MENU" screen will be displayed.
Use the [ / ] buttons to select an item, followed by pressing
the [SET] button. The submenu screen will be displayed.
For the submenu screens, similarly, use the [ / ] buttons to
select an item, then press the [SET] button.
The set value starts blinking and adjustment is possible.
Use the [ / ] buttons to alter the set value, followed by press-
ing the [SET] button. Set value will be confirmed and recorded
in the memory of this unit.
Note
If there is a huge difference in the magnitude of value to be set,
press and hold the [ / ] buttons to speed up the change.
Use this when making a significant change to the set value.
Press the [MENU] button for 1-2 seconds.
The normal screen will be displayed.