Accessing The Avocent Digital Access Kvm Module Through The Drac/Mc; Using The Video Viewer - Dell PowerEdge 1855 Konfigurationsanleitung

Table 2-3. KVM NIC Settings
Setting
MAC Address
Use DHCP
(For NIC IP Address)
(Default: Off)
Static IP Address
Static Gateway
Static Subnet Mask
Auto Negotiation
Duplex Mode
Network Speed

Accessing the Avocent Digital Access KVM Module through the DRAC/MC

1 From your browser, type in the correct URL to bring up the DRAC/MC interface.
2 Click on DRAC/MC on the left side of the DRAC interface to open the menu beneath it.
3 Open the Video Viewer by selecting Console, or work with virtual media (by selecting

Using the Video Viewer

Using the Video Viewer, you can view and manage servers remotely as easily as if you were
physically present. Using the Virtual Media dialog box, you can manage virtual media sessions
allowing you to remotely back up servers, perform recovery operations, and manage operating
system installation to name a few examples.
1 From your browser, type in the correct URL to bring up the DRAC/MC interface.
2 Click on DRAC/MC on the left side of the DRAC interface to open the menu beneath it.
36
Configuring the KVM Switch Module
Downloaded from www.Manualslib.com
Description
Displays the KVM MAC address.
Causes Dell OpenManage™ to obtain the IP address for the Avocent Digital
Access KVM NIC from the DHCP server; deactivates the Static IP Address,
Static Subnet Mask, and Static Gateway controls.
Specifies or edits the Static IP address for the Avocent Digital Access KVM
module NIC. This option is not available if Use DHCP is selected.
Specifies or edits the static gateway for the Avocent Digital Access KVM NIC.
This option is not available if Use DHCP is selected.
Specifies or edits the static subnet mask for the Avocent Digital Access KVM
NIC. This option is not available if Use DHCP is selected.
Determines whether the DRAC/MC automatically sets the Duplex Mode and
Network Speed by communicating with the nearest router or hub (On) or
allows you to set the Duplex Mode and Network Speed manually (Off).
Enables you to set the duplex mode to full or half to match your network
environment. This option is not available if Auto Negotiation is set to On.
Enables you to set the network speed to 100 Mb or 10 Mb to match your
network environment. This option is not available if Auto Negotiation is set to
On.
See the DRAC/MC documentation for details.
Media).
See the DRAC/MC documentation for details.
manuals search engine