Dell PowerEdge 1855 Konfigurationsanleitung Seite 34

To set or change the password:
1 Single-click and press <Enter> or double-click in the New text box.
2 Type the new password in the New text box and press <Enter>. Passwords require 5 to
3 In the Repeat box, type the password again and press <Enter>.
4 Click OK if you only want to change your password, and then close the dialog box.
To password protect your console:
1 Set your password as described in the previous procedure.
2 Select Enable Screen Saver.
3 Type the number of minutes for Inactivity Time (from 1 to 99) to delay activation of
4 For Mode, select Energy if your monitor is ENERGY STAR compliant; otherwise select
5 (Optional) Click Test to activate the screen saver test which lasts 10 seconds then returns you
6 Click OK.
To log in to your console:
1 Press <Print Screen> to launch OSCAR.
2 Type your password and then click OK.
3 The Main dialog box appears if the password was entered properly.
To automatically log out of a server module when inactive:
1 In the Main dialog box, click Setup - Security.
2 Type your password, and then click OK.
3 In the Inactivity Time text box, enter the length of time you want to stay connected
4 Click OK.
To remove password protection from your console:
1 In the Main dialog box, click Setup - Security.
2 Type your password, and then click OK.
32
Configuring the KVM Switch Module
Downloaded from www.Manualslib.com
12 characters and must include at least one letter and one number. Passwords are also case
sensitive. Legal characters are: A-Z, a-z, and 0-9.
password protection and the screen saver feature.
Screen.
CAUTION:
Monitor damage can result from the use of Energy mode with monitors not compliant with
ENERGY STAR.
to the Security dialog box.
The Security dialog box appears.
to a server module before it automatically disengages you.
manuals search engine