Dell PowerEdge 1855 Konfigurationsanleitung Seite 30

To access the Main dialog box:
1 Press <Print Screen> to launch OSCAR.
2 The Main dialog box appears.
The status of server modules in your system is indicated in the far right column of the Main dialog
box. Table 2-1 describes the status symbols.
Table 2-1. OSCAR Status Symbols
Symbol
Selecting Server Modules
Use the Main dialog box to select server modules. When you select a server module, the KVM
switch reconfigures the keyboard and mouse to the proper settings for that server module.
To select server modules:
•
•
•
Disconnecting the analog user from a server module
Press <Print Screen> and then <Alt><0>. This leaves you in a free state, with no server module
selected. The status flag on your desktop, if active, displays Free.
28
Configuring the KVM Switch Module
Downloaded from www.Manualslib.com
If no password is assigned, the Main dialog box appears.
If a password has been assigned, the Password dialog box appears.Type your password and
click OK.
NOTE:
You can also press the <Ctrl> key twice within one second to launch OSCAR. You can use this key
sequence in any place you see <Print Screen> throughout this User's Guide.
Description
Server module is powered on
Server module is powered off or not installed
User connection
Double-click the server module name or slot number.
Type the slot number and press <Enter>.
If the display order of your server module list is by name (Name button is depressed),
type the first few letters of the name of the server module and press <Enter> twice.
manuals search engine