Dell PowerEdge 1855 Konfigurationsanleitung Seite 35

3 In the Security dialog box, single-click and press <Enter> or double-click in the New box.
Leave the box blank. Press <Enter>.
4 Single-click and press <Enter> or double-click in the Repeat box. Leave the box blank.
Press <Enter>.
5 Click OK if you only want to eliminate your password.
To enable the screen saver mode with no password protection:
1 If your console does not require a password to gain access to the Security dialog box,
go to step 2.
- or -
If your console is password protected, see the previous procedure, then go to step 2.
2 Select Enable Screen Saver.
3 Type the number of minutes for delay time (from 1 to 99) that you want to delay activation
of the screen saver.
4 Choose Energy if your monitor is ENERGY STAR compliant; otherwise select Screen.
CAUTION:
ENERGY STAR.
5 (Optional) Click Test to activate the screen saver test which lasts 10 seconds then returns you
to the Security dialog box.
6 Click OK.
NOTE:
Activation of the screen saver mode disconnects the user from a server module; no server
module is selected. The status flag displays Free.
To exit the screen saver mode:
Press any key or move your mouse.
To turn off the screen saver:
1 In the Security dialog box, clear Enable Screen Saver.
2 Click OK.
To immediately turn on the screen saver:
Press <Print Screen>, then press <Pause>.
NOTE:
Enable Screen Saver must be selected in the Security dialog box.
Downloaded from www.Manualslib.com
Monitor damage can result from the use of Energy mode with monitors not compliant with
manuals search engine
Configuring the KVM Switch Module
33