Hama FTA Benutzerhandbuch Seite 73

The FLASH Content of Flash DataBase, Satellite DataBase / STATIC, Resource,
Application & EEPROM of the Master Receiver will start transmitting one by one into the
Slave Receiver immediately.
DON'T SWITCH OFF BOTH THE MASTER & SLAVE RECEIVERS UNTIL THE LOADER OSD
IS CLEARED. THE WHOLE UPLOAD PROCESS WILL TAKE ABOUT 4 MINUTES FOR ALL
THE TRANSMITTING.
YOU CAN RE-START AGAIN IN CASE ANY AC POWER FAILURE DURING THE UPLOAD /
DOWNLOAD PROCESS.
After transmitting, the Master Receiver will boot up first.
For the Slave Receiver to boot wait for about 5 to 10 seconds after the PC/URT OSD
screen is cleared.
73