Main Menu - Hama FTA Benutzerhandbuch

Main Menu

Now, this chapter assumes that the receiver system have been installed correctly,
meaning :
• The satellite dish for the receiver has been installed, connected to the receiver and
correctly adjusted to the proper satellite.
• The receiver is connected to the TV.
• The RCU has batteries and ready to control the receiver.
If the receiver has not been installed or connected properly, please refer to the
Connecting to Dish & Connecting to TV & VCR menu on this manual.
During the installation, short information is displayed at the bottom of the menu screen.
After you finish the setup procedure, you can start watching TV or listening to Radio.
When you turn ON your TV and receiver, the open OSD will come out.
Many of the functions of the receiver are available from the Main Menu.
Press the button on RCU to open it.
MENU
It may request you to input the correct password when the Access to be ON.
(Refer to PARENTAL LOCK, ACCESS CONTROL).
The default password is " 0000 ".
54