Connecting To Tv & Vcr - Hama FTA Benutzerhandbuch

Connecting to TV & VCR
• Install the receiver in horizontal position
• Do not put any heavy stuff such as a TV on receiver
• Do not install the receiver in the place as follows : vibrating place, direct sunlight,
humid place, too high or too low temperature, and no ventilated place.
Receiver to TV set with RF & Hi-Fi
1. Connect the TV antenna to ANT IN port of the RF Modulator.*
2. Connect the RF IN of TV to RF OUT port of the receiver.*
3. Connect the Audio of Hi-Fi to the Audio of the receiver.
Connect Red and White connector to Audio R and Audio L port respectively.
Receiver to TV & VCR with RF*
1. Connect the TV antenna to ANT IN port of the RF Modulator.
2. Connect the RF IN of VCR to RF OUT of receiver with RF cable.
3. Connect the RF IN of TV to RF OUT port of the VCR.
*(only on modulator version)
52
Dish
Dish
Aerial
Aerial