System Setup; Osd Language; Uhf Modulator; A/V Output - Hama FTA Benutzerhandbuch

In the System Setup Menu, you can select:

1. OSD LANGUAGE

2. OUTPUT CH

3. A/V OUTPUT

4. TIME SETTING
5. PARENTAL CONTROL
6. OSD TRANSPARENCY
7. DISPLAY TIME
• Press OK to select item
• Use Up/Down ( / ) button you can move
upward and downwards
• Use V-/V+ ( / ) button to select proper data
OSD LANGUAGE
There are many languages available for the
Menu.
The default language is German.
(Different model with different default OSD
language)

UHF MODULATOR

f CHANNEL NO.
Choose the UHF Channel. The default UHF
channel is CH35.
f STANDARD
Allow you to change the Audio sound
system standard. You can select PAL B/G,
PAL I, PAL D/K or NTSC.
A/V OUTPUT
f VIDEO OUTPUT
Select the Video Output according to your
TV, the receiver converts the input signal
into a fit to your TV set. You can select
AUTO, PAL, PAL M, PAL N, NTSC.
f AUDIO MODE
Allow you to configure the sound mode to
Stereo, Mono L, and Mono R.
f TV ASPECT RATIO
Enables the setting of the screen format of the
TV. 4:3 (Full Screen), 4:3 Letterbox and 16:9.
*(only on modulator version)

System Setup

61