Channel Search; Lnb Setup; Lnb Power; Installation - Hama FTA Benutzerhandbuch

In the Installation Menu, you can select:

1. LNB SETUP

2. CHANNEL SEARCH

3. SAT/TRANSPONDER EDIT
4. AUTOMATIC TUNING
5. FACTORY DEFAULT
• Press OK to select item
• Use Up/Down ( / ) button you can move
upward and downwards
LNB SETUP
f SATELLITE
Press OK button to display the Satellite List
box. The Satellite name is listed in orbit
position. Select one of the pre-program-
med satellite from the list.
If the satellite is not in the list, you can add
the SATELLITE in the SAT/TP EDIT Menu.
f LNB POWER
Select the LNB Power ON for supply the LNB power internal or OFF for external.
It is memorized per each Satellite.
f 22KHZ
If using a Dual LNB or two antenna connected to a 22kHz tone switch box, make 22kHz
switch ON or OFF to select LNB or antenna.
It will be set to AUTO if the LNB FREQUENCY is UNIVERSAL.

Installation

f LNB FREQUENCY
Select the LO frequency to the LNB
using.
The LNB Frequency of 5150, Single C,
Universal, 9750, 10600, 10750, 11300 MHz
can be selected by using the V-/V+ ( / )
button. Or you can input proper frequen-
cy with the numeric keys on RCU.
63