Manual Search Mode; Auto Search Mode; Advanced Search Mode - Hama FTA Benutzerhandbuch

- MANUAL search mode

You can select the transponder frequency offered by the pre-programmed satellite by
using V-/V+ ( / ) button. Or you can input the Frequency, Polarization, Symbol Rate,
Network search option, and FTA/Scrambled option to search any digital signal. It will
save as new transponder if search success with stored new channel.
FREQUENCY = Any pre-stored transponder frequency or you can enter by using the
numeric buttons on RCU, in MHz.
POLARIZATION = Choose the type of polarization, select either HOR for horizontal or the
VER for vertical polarity.
SYMBOL RATE = Enter the symbol rate by using the numeric buttons on RCU, in kS/s.
NETWORK SEARCH = OFF or ON in order to search other transponders belong to the
same network by the NIT (Network Information Table).
PID = It is only available in ADVANCED search mode.
FTA/SCRAMBLED = Choose your favorable channels among ALL, FTA only, CAS only.
Press OK button any time to go to the search process, CH Search Process window will
appear. Please refer to the CH Search Process topic in page 22.

- AUTO search mode

You can search all the transponders fre-
quency offered by the satellite you selec-
ted in AUTO search mode.
Only the parameter FTA / SCRAMBLED /
you can select. Choose your favorable
channels among ALL, FTA only, CAS only.
Press OK button any time to go to the
search process, CH Search Process
window will appear. Please refer to the
CH Search Process topic in page 22.

- ADVANCED search mode

You can find the channels by entering the
Video PID, Audio PID and PCR PID by
using the numeric buttons on RCU.
Maximum 4 digits can be entered.
To ensure the above Video/Audio/PCR
number, select the SAVE and press OK.
A new channel will be added into the TV
Channel List.
65