Accessories; Technical Data - Hilti HIT-ED 3500-A Bedienungsanleitung

LEDs light constantly
LED 1,2,3
LED 1,2
LED 1
-
-
2.4 Items supplied as standard
1 The appliance
1 Brushes
1 Protective glasses
1 Hilti toolbox or cardboard box
1-2 Holders for foil packs
1 Operating instructions

3. Accessories

Designation
Battery
Charger

4. Technical data

Right of technical changes reserved.
Power tool
Weight (including battery)
Selector switch
Motor stop
Noise information (measured in accordance with EN 60745):
Typical A-weighted sound power level
Typical A-weighted emission sound pressure level
Uncertainty for the given sound level
NOTE
The vibration emission level given in this information sheet has been measured in accordance with a
standardised test given in EN 60745 and may be used to compare one tool with another. It may be used for a
preliminary assessment of exposure. The declared vibration emission level represents the main applications of
the tool. However if the tool is used for different applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly increase the exposure level over the total working
period. An estimation of the level of exposure to vibration should also take into account the times when the
tool is switched off or when it is running but not actually doing the job. This may significantly reduce the
exposure level over the total working period. Identify additional safety measures to protect the operator from
Downloaded from www.Manualslib.com
Printed: 07.07.2013 | Doc-Nr: PUB / 5069993 / 000 / 00
manuals search engine
LEDs blink
-
-
-
LED 1
LED 1
Short designation
B 144/2.6 Li ion
C 4/36 or C 4/36 ACS
2.55 kg
positions: off, continuous operation, single stroke
electronic overload prevention cut-out
74 dB (A)
63 dB (A)
3 dB (A)
Charge status C
50 % C < 75 %
25 % C < 50 %
10 % C < 25 %
C < 10 %
Battery overheated
en
15