Silvercrest IAN 274299 Bedienungs- Und Sicherheitshinweise Seite 26

274299_B_Zeitschaltuhren_digital_content_RO_BG.indd 26
Downloaded from www.Manualslib.com
4. Set the respective time using the
HOUR and MINUTE
12
5. Press the TIMER
selection. The switch-on time has been
programmed. The LCD
switch-off time.
6. Set the switch-off time as described in
steps 3. to 5.
7. After entering the program, confirm with
the CLOCK button
onds until the current time is displayed.
Set current status
If the clock should be on at the current time
(ON), the ON / OFF / AUTO button
be pressed until ON appears on the screen.
Then press the button again so AUTO appears.
If the clock should be off at the current time
(OFF), the ON / OFF / AUTO button
be pressed until OFF appears on the screen.
Then press the button again so AUTO appears.
26 GB
manuals search engine
buttons.
2
button to confirm the
8
will switch to
1
or wait 10 sec-
9
must
5
must
5
22.04.16 07:19