Safety Instructions; Electrical Connection - Electrolux EHF6747FOK Benutzerinformation

4 www.electrolux.com
•
•
•
•

2. SAFETY INSTRUCTIONS

2.1 Installation
• Remove all the packaging.
• Do not install or use a damaged
• Obey the installation instruction
• Keep the minimum distance from the
• Always be careful when you move the
• Seal the cut surfaces with a sealant to
• Protect the bottom of the appliance
• Do not install the appliance adjacent to
• If the appliance is installed above
• The bottom of the appliance can get
Downloaded from www.Manualslib.com
Metallic objects such as knives, forks, spoons and lids
should not be placed on the hob surface since they can
get hot.
Do not use a steam cleaner to clean the appliance.
If the glass ceramic surface/ glass surface is cracked,
switch off the appliance to avoid the possibility of
electric shock
If the supply cord is damaged, it must be replaced by
the manufacturer, an authorized Service or similarly
qualified persons in order to avoid a hazard.
WARNING!
Only a qualified person must
install this appliance.
appliance.
supplied with the appliance.
other appliances and units.
appliance because it is heavy. Always
wear safety gloves.
prevent moisture to cause swelling.
from steam and moisture.
a door or under a window. This
prevents hot cookware to fall from the
appliance when the door or the
window is opened.
drawers make sure that the space,
between the bottom of the appliance
and the upper drawer, is sufficient for
air circulation.
hot. Make sure to install a non-
combustile separation panel under the
appliance to prevent access to the
bottom.
manuals search engine

2.2 Electrical Connection

WARNING!
Risk of fire and electrical
shock.
• All electrical connections should be
made by a qualified electrician.
• The appliance must be earthed.
• Before carrying out any operation make
sure that the appliance is disconnected
from the power supply.
• Make sure that the electrical
information on the rating plate agrees
with the power supply. If not contact
an electrician.
• Make sure the appliance is installed
correctly. Loose and incorrect
electricity mains cable or plug (if
applicable) can make the terminal
become too hot.
• Use the correct electricity mains cable.
• Do not let the electricity mains cable
tangle.
• Make sure that a shock protection is
installed.
• Use the strain relief clamp on the cable.
• Make sure the mains cable or plug (if
applicable) does not touch the hot
appliance or hot cookware, when you
connect the appliance to the near
sockets
• Do not use multi-plug adapters and
extension cables.
• Make sure not to cause damage to the
mains plug (if applicable) or to the
mains cable. Contact an Authorised