Electrolux EHF6747FOK Benutzerinformation Seite 9

To deactivate the function: change the
heat setting.
4.6 Timer
Count Down Timer
You can use this function to set how long
the cooking zone operates for only this
one time.
First set the cooking zone then set the
function. You can set the heat setting
before or after you set the function.
To set the cooking zone: touch
again and again until the indicator of a
necessary cooking zone comes on.
To activate the function: touch
the timer to set the time (00 - 99 minutes).
When the indicator of the cooking zone
starts to flash slowly the time counts
down.
To see the remaining time: set the
cooking zone with
cooking zone starts to flash quickly. The
display shows the remaining time.
To change the time: set the cooking
zone with
To deactivate the function: set the
cooking zone with
remaining time counts back to 00. The
indicator of the cooking zone goes out.
To stop the sound: touch
CountUp Timer (The count up timer)
You can use this function to monitor how
long the cooking zone operates.
To set the cooking zone: touch
again and again until the indicator of a
necessary cooking zone comes on.
To activate the function: touch
the timer.
indicator of the cooking zone starts to
flash slowly the time counts up. The
Downloaded from www.Manualslib.com
. The indicator of the
. Touch or
and touch
When the time comes to an
end, the sound operates and
00 flashes. The cooking zone
deactivates.
comes on. When the
manuals search engine
display switches between
time (minutes).
To see how long the cooking zone
operates: set the cooking zone with
The indicator of the cooking zone starts to
flash quickly. The display shows how long
the zone operates.
To deactivate the function: set the
cooking zone with
The indicator of the cooking zone goes
out.
Minute Minder
You can use this function as a Minute
Minder when the hob is activated and the
cooking zones do not operate (the heat
of
setting display shows
To activate the function: touch
Touch
time. When the time comes to an end, the
sound operates and 00 flashes.
To stop the sound: touch
.
4.7 STOP+GO
. The
This function sets all cooking zones that
operate to the lowest heat setting.
When the function operates, you cannot
change the heat setting.
The function does not stop the timer
functions.
. To activate the function: touch
comes on.
To deactivate the function: touch
The previous heat setting comes on.
4.8 Lock
You can lock the control panel while
cooking zones operate. It prevents an
of
accidental change of the heat setting.
Set the heat setting first.
To activate the function: touch
comes on for 4 seconds. The Timer stays
on.
ENGLISH
and counted
and touch
).
or of the timer to set the
.
The function has no effect on
the operation of the cooking
zones.
9
.
or .
.
.
.
.